|
|
Ghali, M., Ohtani1, K., Ohno, Y., & Ohno, H. (2012). Generation and control of polarization-entangled photons from GaAs island quantum dots by an electric field. Nat. Comm., 3(661), 6.
Abstract: Semiconductor quantum dots are potential sources for generating polarization-entangled photons efficiently. The main prerequisite for such generation based on biexciton-exciton cascaded emission is to control the exciton fine-structure splitting. Among various techniques investigated for this purpose, an electric field is a promising means to facilitate the integration into optoelectronic devices. Here we demonstrate the generation of polarization-entangled photons from single GaAs quantum dots by an electric field. In contrast to previous studies, which were limited to In(Ga)As quantum dots, GaAs island quantum dots formed by a thickness fluctuation were used because they exhibit a larger oscillator strength and emit light with a shorter wavelength. A forward voltage was applied to a Schottky diode to control the fine-structure splitting. We observed a decrease and suppression in the fine-structure splitting of the studied single quantum dot with the field, which enabled us to generate polarization-entangled photons with a high fidelity of 0.72 ± 0.05.
|
|
|
|
Grotz, B., Hauf, M. V., Dankerl, M., Naydenov, B., Pezzagna, S., Meijer, J., et al. (2012). Charge state manipulation of qubits in diamond. Nat. Comm., 3(729), 6.
Abstract: The nitrogen-vacancy (NV) centre in diamond is a promising candidate for a solid-state qubit. However, its charge state is known to be unstable, discharging from the qubit state NV- into the neutral state NV0 under various circumstances. Here we demonstrate that the charge state can be controlled by an electrolytic gate electrode. This way, single centres can be switched from an unknown non-fluorescent state into the neutral charge state NV0, and the population of an ensemble of centres can be shifted from NV0 to NV-. Numerical simulations confirm the manipulation of the charge state to be induced by the gate-controlled shift of the Fermi level at the diamond surface. This result opens the way to a dynamic control of transitions between charge states and to explore hitherto inaccessible states, such as NV+.
|
|
|
|
Gao, J., McMillan, J. F., & Wong, C. W. (2012). Nanophotonics: Remote on-chip coupling. Nat. Photon., 6(1), 7–8.
Abstract: Scientists have demonstrated strongly coupled photon states between two distant high-Q photonic crystal cavities connected by a photonic crystal waveguide. Remote dynamic control over the coupled states could aid the development of delay lines, optical buffers and qubit operations in both classical and quantum information processing.
|
|
|
|
Pile, D. (2012). How many bits can a photon carry. Nat. Photon., 6(1), 14–15.
Abstract: Quantum physics offers a way to enhance the amount of information a photon can carry, with potential applications in optical communication, lithography, metrology and imaging.
|
|
|
|
Santori, C., & Beausoleil, R. G. (2012). Quantum memory: Phonons in diamond crystals. Nat. Photon., 6, 10–12.
Abstract: The demonstration that quantum information can be stored in a bulk-diamond crystal in the form of an optically excited phonon gives researchers a new type of mechanical solid-state quantum memory to explore.
|
|
|
|
Xu, X. A., & Wong, C. W. (2012). Quantum optics: Correlations on a chip. Nat. Photon., 6, 75–76.
Abstract: Researchers have developed a semiconductor structure capable of supporting quantum correlations between photons and strong single-photon nonlinearities, thus paving the way for the development of chip-based devices for quantum secure communications and quantum information processing.
|
|
|
|
He, R., Sazio, P. J. A., Peacock, A. C., Healy, N., Sparks, J. R., Krishnamurthi, M., et al. (2012). Integration of gigahertz-bandwidth semiconductor devices inside microstructured optical fibres. Nat. Photon., 6(3), 174–179.
Abstract: The prospect of an all-fibre optical communications network in which light can be generated, modulated and detected within the fibre itself without the need for discrete optoelectronic devices is an appealing one. However, to become a reality, this approach requires the incorporation of optoelectronic materials and functionalities into silica fibres to create a new breed of semiconductor-fibre hybrid devices for performing various tasks. Here, we report the integration of precisely doped semiconductor materials and high-quality rectifying semiconductor junctions into microstructured optical fibres, enabling high-speed, in-fibre functionalities such as photodetection at telecommunications wavelengths. These semiconductor-fibre hybrid devices exhibit a bandwidth of up to 3 GHz and seamless coupling to standard single-mode optical fibres.
|
|
|
|
Yao, X. - C., Wang, T. - X., Xu, P., Lu, H., Pan, G. - S., Bao, X. - H., et al. (2012). Observation of eight-photon entanglement. Nat. Photon., 6(4), 225–228.
Abstract: The creation of increasingly large multipartite entangled states is not only a fundamental scientific endeavour in itself, but is also the enabling technology for quantum information. Tremendous experimental effort has been devoted to generating multiparticle entanglement with a growing number of qubits. So far, up to six spatially separated single photons have been entangled based on parametric downconversion. Multiple degrees of freedom of a single photon have been exploited to generate forms of hyper-entangled states. Here, using new ultra-bright sources of entangled photon pairs, an eight-photon interferometer and post-selection detection, we demonstrate for the first time the creation of an eight-photon Schrödinger cat state with genuine multipartite entanglement. The ability to control eight individual photons represents a step towards optical quantum computation, and will enable new experiments on, for example, quantum simulation, topological error correction and testing entanglement dynamics under decoherence.
|
|
|
|
Pris, A. D., Utturkar, Y., Surman, C., Morris, W. G., Vert, A., Zalyubovskiy, S., et al. (2012). Towards high-speed imaging of infrared photons with bio-inspired nanoarchitectures. Nat. Photon., 6(3), 195–200.
Abstract: Existing infrared detectors rely on complex microfabrication and thermal management methods. Here, we report an attractive platform of low-thermal-mass resonators inspired by the architectures of iridescent Morpho butterfly scales. In these resonators, the optical cavity is modulated by its thermal expansion and refractive index change, resulting in `wavelength conversion' of mid-wave infrared (3-8 µm) radiation into visible iridescence changes. By doping Morpho butterfly scales with single-walled carbon nanotubes, we achieved mid-wave infrared detection with 18-62 mK noise-equivalent temperature difference and 35-40 Hz heat-sink-free response speed. The nanoscale pitch and the extremely small thermal mass of individual `pixels' promise significant improvements over existing detectors. Computational analysis explains the origin of this thermal response and guides future conceptually new bio-inspired thermal imaging sensor designs.
|
|
|
|
Nozaki, K., Shinya, A., Matsuo, S., Suzaki, Y., Segawa, T., Sato, T., et al. (2012). Ultralow-power all-optical RAM based on nanocavities. Nat. Photon., 6(4), 248–252.
Abstract: Optical random-access memory (o-RAM) has been regarded as one of the most difficult challenges in terms of replacing its various functionalities in electronic circuitry with their photonic counterparts. Nevertheless, it constitutes a key device in optical routing and processing. Here, we demonstrate that photonic crystal nanocavities with an ultrasmall buried heterostructure design can solve most of the problems encountered in previous o-RAMs. By taking advantage of the strong confinement of photons and carriers and allowing heat to escape efficiently, we have realized all-optical RAMs with a power consumption of only 30 nW, which is more than 300 times lower than the previous record, and have achieved continuous operation. We have also demonstrated their feasibility in multibit integration. This paves the way for constructing a low-power large-scale o-RAM system that can handle high-bit-rate optical signals.
|
|
