Bibliography database of Radiophysics Laboratory (RpLab) -- Query Results

	Bibliography database of Radiophysics Laboratory (RpLab) Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1-100 of 386 records found matching your query:

Search & Display Options

Select All Deselect All

<< 1 2 3 4 >>

List View

Citations

Details

	Records
	Author	Ryabchun, S. A.; Tretyakov, I. V.; Finkel, M. I.; Maslennikov, S. N.; Kaurova, N. S.; Seleznev, V. A.; Voronov, B. M.; Goltsman, G. N.
	Title	Fabrication and characterisation of NbN HEB mixers with in situ gold contacts			Type	Conference Article
	Year	2008	Publication	Proc. 19^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 19^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	62-67
	Keywords	HEB, mixer, NbN, in-situ contacts
	Abstract	We present our recent results of the fabrication and testing of NbN hot-electron bolometer mixers with in situ gold contacts. An intermediate frequency bandwidth of about 6 GHz has been measured for the mixers made of a 3.5-nm NbN film on a plane Si substrate with in situ gold contacts, compared to 3.5 GHz for devices made of the same film with ex situ gold contacts. The increase in the intermediate frequency bandwidth is attributed to additional diffusion cooling through the improved contacts, which is further supported by the its dependence on the bridge length: intermediate frequency bandwidths of 3.5 GHz and 6 GHz have been measured for devices with lengths of 0.35 μm and 0.16 μm respectively at a local oscillator frequency of 300 GHz near the superconducting transition. At a local oscillator frequency of 2.5 THz the receiver has offered a DSB noise temperature of 950 K. When compared to the previous result of 1300 K obtained at the same local oscillator frequency for devices fabricated with an ex situ route, such a low value of the noise temperature may also be attributed to the improved gold contacts.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Groningen, Netherlands	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	412
Permanent link to this record



	Author	Smirnov, A. V.; Larionov, P. A.; Finkel, M. I.; Maslennikov, S. N.; Voronov, B. M.; Gol'tsman, G. N.
	Title	NbZr films for THz phonon-cooled HEB mixers			Type	Conference Article
	Year	2008	Publication	Proc. 19^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 19^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	44-47
	Keywords	HEB, NbZr, material search
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Groningen, Netherlands	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	577
Permanent link to this record



	Author	Cherednichenko, S.; Kollberg, E.; Angelov, I.; Drakinskiy, V.; Berg, T.; Merkel, H.
	Title	Effect of the direct detection effect on the HEB receiver sensitivity calibration			Type	Conference Article
	Year	2005	Publication	Proc. 16^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	235-239
	Keywords	HEB, mixer, direct detection effect
	Abstract	We analyze the scale of the HEB receiver sensitivity calibration error caused by the so called “direct detection effect”. The effect comes from changing of the HEB parameters when whey face the calibration loads of different temperatures. We found that for HIFI Band 6 mixers (Herschel Space Observatory) the noise temperature error is of the order of 8% for 300K/77K loads (lab receiver) and 2.5% for 100K/10K loads (in HIFI). Using different approach we also predict that with an isolator between the mixer and the low noise amplifiers the error can be much smaller.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Göteborg, Sweden	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	360
Permanent link to this record



	Author	Baselmans, J.; Kooi, J.; Baryshev, A.; Yang, Z. Q.; Hajenius, M.; Gao, J. R.; Klapwijk, T. M.; Voronov, B.; Gol’tsman, G.
	Title	Full characterization of small volume NbN HEB mixers for space applications			Type	Conference Article
	Year	2005	Publication	Proc. 16^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 16^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	457-462
	Keywords	NbN HEB mixers
	Abstract	NbN phonon cooled HEB’s are one of the most promising bolometer mixer technologies for (near) future (space) applications. Their performance is usually quantified by mea- suring the receiver noise temperature at a given IF frequency, usually around 1 – 2 GHz. However, for any real applications it is vital that one fully knows all the relevant properties of the mixer, including LO power, stability, direct detection, gain bandwidth and noise bandwidth, not only the noise temperature at low IF frequencies. To this aim we have measured all these parameters at the optimal operating point of one single, small volume quasioptical NbN HEB mixer. We find a minimum noise temperature of 900 K at 1.46 THz. We observe a direct detection effect indicated by a change in bias current when changing from a 300 K hot load to a 77 K cold load. Due to this effect we overestimate the noise temperature by about 22% using a 300 K hot load and a 77 K cold load. The LO power needed to reach the optimal operating point is 80 nW at the receiver lens front, 59 nW inside the NbN bridge. However, using the isothermal technique we find a power absorbed in the NbN bridge of 25 nW, a difference of about a factor 2. We obtain a gain bandwidth of 2.3 GHz and a noise bandwidth of 4 GHz. The system Allan time is about 1 sec. in a 50 MHz spectral bandwidth and a deviation from white noise integration (governed by the radiometer equation) occurs at 0.2 sec., which implies a maximum integration time of a few seconds in a 1 MHz bandwidth spectrometer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Göteborg, Sweden	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	363
Permanent link to this record



	Author	Finkel, M. I.; Maslennikov, S. N.; Vachtomin, Yu. B.; Svechnikov, S. I.; Smirnov, K. V.; Seleznev, V. A.; Korotetskaya, Yu. P.; Kaurova, N. S.; Voronov, B. M.; Gol'tsman, G. N.
	Title	Hot electron bolometer mixer for 20 – 40 THz frequency range			Type	Conference Article
	Year	2005	Publication	Proc. 16^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 16^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	393-397
	Keywords	IR NbN HEB mixers
	Abstract	The developed HEB mixer was based on a 5 nm thick NbN film deposited on a GaAs substrate. The active area of the film was patterned as a 30×20 μm 2 strip and coupled with a 50 Ohm coplanar line deposited in situ. An extended hemispherical germanium lens was used to focus the LO radiation on the mixer. The responsivity of the mixer was measured in a direct detection mode in the 25÷64 THz frequency range. The noise performance of the mixer and the directivity of the receiver were investigated in a heterodyne mode. A 10.6 μm wavelength CW CO 2 laser was utilized as a local oscillator.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Göteborg, Sweden	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	369
Permanent link to this record



	Author	Maslennikov, S. N.; Finkel, M. I.; Antipov, S. V.; Polyakov, S. L.; Zhang, W.; Ozhegov, R.; Vachtomin, Yu. B.; Svechnikov, S. I.; Smirnov, K. V.; Korotetskaya, Yu. P.; Kaurova, N. S.; Gol'tsman, G. N.; Voronov, B. M.
	Title	Spiral antenna coupled and directly coupled NbN HEB mixers in the frequency range from 1 to 70 THz			Type	Conference Article
	Year	2006	Publication	Proc. 17^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 17^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	177-179
	Keywords	directly coupled NbN HEB mixers
	Abstract	We investigate both antenna coupled and directly coupled HEB mixers at several LO frequencies within the range of 2.5 THz to 70 THz. H20 (2.5+10.7 THz), and CO2 (30 THz) gas discharge lasers are used as the local oscillators. The noise temperature of antenna coupled mixers is measured at LO frequencies of 2.5 THz, 3.8 THz, and 30 THz. The results for both antenna coupled and directly coupled mixer types are compared. The devices with in—plane dimensions of 5x5 ,um 2 are pumped by LO radiation at 10.7 THz. The directly coupled HEB demonstrates nearly flat dependence of responsivity on frequency in the range of 25+64 THz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris, France	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	386
Permanent link to this record



	Author	Karasik, B. S.; Elantiev, A. I.
	Title	Analysis of the noise performance of a hot-electron superconducting bolometer mixer			Type	Conference Article
	Year	1995	Publication	Proc. 6^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 6^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	229-246
	Keywords	HEB mixers
	Abstract	A theoretical analysis for the noise temperature of hot–electron superconducting mixer has been presented. Thecontributions of both Johnson noise and electron temperature fluctuations have been evaluated. A set of criteriaensuring low noise performance of the mixer has been stated and a simple analytic expression for the noisetemperature of the mixer device has been suggested. It has been shown that an improvement of the mixer sensitivitydoes not necessarily follow by a decrease of the bandwidth. An SSB noise temperature limit due to the intrinsic noisemechanisms has been estimated to be as low as 40–90 K for a mixer device made from Nb or NbN thin film.Furthermore, the conversion gain bandwidth can be as wide as is allowed by the intrinsic electron temperaturerelaxation time if an appropriate choice of the mixer resistance has been made. The intrinsic mixer noise bandwidthis of 3 GHz for Nb device and of 5 GHz for NbN device. An additional improvement of the theory has been madewhen a distinction between the impedance measured at high intermediate frequency (larger than the mixerbandwidth) and the mixer ohmic resistance has been taken into account.Recently obtained experimental data on Nb and NbNbolometer mixer devices are viewed in connection with thetheoretical predictions.The noise temperature limit has also been specified for the mixer device where an outdiffusion coolingmechanism rather than the electron–phonon energy relaxation determines the mixer bandwidth. A consideration ofthe noise performance of a bolometer mixer made from YBaCuO film utilizing a hot–electron effect has been done.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Pasadena, Ca	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	258
Permanent link to this record



	Author	Yagubov, P.; Gol'tsman, G.; Voronov, B.; Seidman, L.; Siomash, V.; Cherednichenko, S.; Gershenzon, E.
	Title	The bandwidth of HEB mixers employing ultrathin NbN films on sapphire substrate			Type	Conference Article
	Year	1996	Publication	Proc. 7^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 7^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	290-302
	Keywords	NbN HEB mixers, fabrication process
	Abstract	We report on some unusual features observed during fabrication of ultrathin NbN films with high Tc. The films were used to fabricate HEB mixers, which were evaluated for IF bandwidth measurements at 140 GHz. Ultrathin films were fabricated using reactive dc magnetron sputtering with a discharge current source. Reproducible parameters of the films are assured keeping constant the difference between the discharge voltage in pure argon, and in a gas mixture, for the same current. A maximum bandwidth of 4 GHz at optimal LO and dc bias was obtained for mixer chip based on NbN film 35 A thick with Tc = 11 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Charlottesville, Virginia, USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	266
Permanent link to this record



	Author	Cherednichenko, S.; Yagoubov, P.; Il'In, K.; Gol'tsman, G.; Gershenzon, E.
	Title	Large bandwidth of NbN phonon-cooled hot-electron bolometer mixers on sapphire substrates			Type	Conference Article
	Year	1997	Publication	Proc. 8^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 8^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	245-257
	Keywords	NbN HEB mixers, fabrication process
	Abstract	The bandwidth of NbN phonon-cooled hot electron bolometer mixers has been systematically investigated with respect to the film thickness and film quality variation. The films, 2.5 to 10 mm thick, were fabricated on sapphire substrates using DC reactive magnetron sputtering. All devices consisted of several parallel strips, each 1 1.1 wide and 211 long, placed between Ti-Au contact pads. To measure the gain bandwidth we used two identical BWOs operating in the 120-140 GHz frequency range, one functioning as a local oscillator and the other as a signal source. The majority of the measurements were made at an ambient temperature of 4.5 K with optimal LO and DC bias. The maximum 3 dB bandwidth (about 4 GHz) was achieved for the devices made of films which were 2.5-3.5 nm thick, had a high critical temperature, and high critical current density. A theoretical analysis of bandwidth for these mixers based on the two-temperature model gives a good description of the experimental results if one assumes that the electron temperature is equal to the critical temperature.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	276
Permanent link to this record



	Author	Kawamura, J.; Blundell, R.; Tong, C-Y. E.; Gol'tsman, G.; Gershenzon, E.; Voronov, B.; Cherednichenko, S.
	Title	Phonon-cooled NbN HEB mixers for submillimeter wavelengths			Type	Conference Article
	Year	1997	Publication	Proc. 8^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 8^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	23-28
	Keywords	waveguide NbN HEB mixers
	Abstract	The noise performance of receivers incorporating NbN phonon-cooled superconducting hot electron bolometric mixers is measured from 200 GHz to 900 GHz. The mixer elements are thin-film (thickness — 4 nm) NbN with —5 to 40 pm area fabricated on crystalline quartz sub- strates. The receiver noise temperature from 200 GHz to 900 GHz demonstrates no unexpected degradation with increasing frequency, being roughly TRx ,; 1-2 K The best receiver noise temperatures are 410 K (DSB) at 430 GHz, 483 K at 636 GHz, and 1150 K at 800 GHz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	275
Permanent link to this record



	Author	Gerecht, E.; Musante, C. F.; Jian, H.; Yngvesson, K. S.; Dickinson, J.; Waldman, J.; Gol'tsman, G. N.; Yagoubov, P. A.; Voronov, B. M.; Gershenzon, E. M.
	Title	Measured results for NbN phonon-cooled hot electron bolometric mixers at 0.6-0.75 THz, 1.56 THz, and 2.5 THz			Type	Conference Article
	Year	1998	Publication	Proc. 9^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 9^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	105-114
	Keywords	NbN HEB mixers
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1587
Permanent link to this record



	Author	Tong, C.-Y. Edward; Kawamura, Jonathan; Todd, R. Hunter; Papa, D. Cosmo; Blundell, Raymond.; Smith, Michael; Patt, Ferdinand; Gol'tsman, Gregory; Gershenzon, Eugene
	Title	Successful operation of a 1 THz NbN hot-electron bolometer receiver			Type	Conference Article
	Year	2000	Publication	Proc. 11^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 11^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	49-59
	Keywords	NbN HEB mixers, applications
	Abstract	A phonon-cooled NbN superconductive hot-electron bolometer receiver covering the frequency range 0.8-1.04 THz has successfully been used for astronomical observation at the Sub-Millimeter Telescope Observatory on Mount Graham, Arizona. This waveguide heterodyne receiver is a modified version of our fixed-tuned 800 GHz HEB receiver to allow for operation beyond 1 THz. The measured noise temperature of this receiver is about 1250 K at 0.81 THz, 560 K at 0.84 THz, and 1600 K at 1.035 THz. It has a 1 GHz wide IF bandwidth, centered at 1.8 GHz. This receiver has recently been used to detect the CO (9-8) molecular line emission at 1.037 THz in the Orion nebula. This is the first time a ground-based heterodyne receiver has been used to detect a celestial source above 1 THz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	303
Permanent link to this record



	Author	Semenov, A. D.; Hübers, H.–W.; Schubert, J.; Gol'tsman, G. N.; Elantiev, A. I.; Voronov, B. M.; Gershenzon, E. M.
	Title	Frequency dependent noise temperature of the lattice cooled hot-electron terahertz mixer			Type	Conference Article
	Year	2000	Publication	Proc. 11^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 11^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	39-48
	Keywords	NbN HEB mixers
	Abstract	We present the measurements and the theoretical model on the frequency dependent noise temperature of a lattice cooled hot electron bolometer (HEB) mixer in the terahertz frequency range. The experimentally observed increase of the noise temperature with frequency is a cumulative effect of the non-uniform distribution of the high frequency current in the bolometer and the charge imbalance, which occurs near the edges of the normal domain and contacts with normal metal. In addition, we present experimental results which show that the noise temperature of a HEB mixer can be reduced by about 30% due to a Parylene antireflection coating on the Silicon hyperhemispheric lens.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	305
Permanent link to this record



	Author	Cherednichenko, S.; Kroug, M.; Merkel, H.; Kollberg, E.; Loudkov, D.; Smirnov, K.; Voronov, B.; Gol'tsman, G.; Gershenzon, E.
	Title	Local oscillator power requirement and saturation effects in NbN HEB mixers			Type	Conference Article
	Year	2001	Publication	Proc. 12^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 12^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	273-285
	Keywords	NbN HEB mixers, LO power, local oscillator power, saturation effect, dynamic range
	Abstract	The local oscillator power required for NbN hot-electron bolometric mixers (P LO ) was investigated with respect to mixer size, critical temperature and ambient temperature. P LO can be decreased by a factor of 10 as the mixer size decreases from 4×0.4 µm 2 to 0.6×0.13 µm 2 . For the smallest volume mixer the optimal local oscillator power was found to be 15 nW. We found that for such mixer no signal compression was observed up to an input signal of 2 nW which corresponds to an equivalent input load of 20,000 K. For a constant mixer volume, reduction of T c can decrease optimal local oscillator power at least by a factor of 2 without a deterioration of the receiver noise temperature. Bath temperature was found to have minor effect on the receiver characteristics.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	San Diego, CA, USA	Editor	Jet Propulsion Laboratory, California Inst.it.u.t.e of Technology
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	318
Permanent link to this record



	Author	Kroug, M.; Cherednichenko, S.; Choumas, M.; Merkel, H.; Kollberg, E.; Hübers, H.-W.; Richter, H.; Loudkov, D.; Voronov, B.; Gol'Tsman, G.
	Title	HEB quasi-optical heterodyne receiver for THz frequencies			Type	Conference Article
	Year	2001	Publication	Proc. 12^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	244-252
	Keywords	HEB mixer, NbN, MgO, conversion gain bandwidth, noise temperature
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	San Diego, CA, USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	319
Permanent link to this record



	Author	Hübers, H.-W.; Semenov, A. D.; Richter, H.; Schubert, J.; Hadjiloucas, S.; Bowen, J. W.; Gol'tsman, G.; Voronov, B. M.; Gershenzon, E. M.
	Title	Antenna pattern of the quasi-optical hot-electron bolometric mixer at terahertz frequencies			Type	Conference Article
	Year	2001	Publication	Proc. 12^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 12^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	286-296
	Keywords	NbN HEB mixers
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	San Diego, CA, USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	323
Permanent link to this record



	Author	Vahtomin, Yuriy B.; Finkel, Matvey I.; Antipov, Sergey V.; Voronov, Boris M.; Smirnov, Konstantin V.; Kaurova, Natalia S.; Drakinski, Vladimir N.; Gol'tsman, Gregogy N.
	Title	Gain bandwidth of phonon-cooled HEB mixer made of NbN thin film with MgO buffer layer on Si			Type	Conference Article
	Year	2002	Publication	Proc. 13^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 13^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	259-270
	Keywords	NbN HEB mixers, conversion gain bandwidth
	Abstract	We present recently obtained values for gain bandwidth of NbN HEB mixers for different substrates and film thicknesses and for MgO buffer layer on Si at LO frequency of 0.85-1 THz. The maximal bandwidth, 5.2 GHz, was achieved for the device on MgO buffer layer on Si with a 2 nm thick NbN film. Functional devices based on NbN films of such thickness were fabricated for the first time due to an improvement of superconducting properties of NbN film deposited on MgO buffer layer on Si substrate.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, MA, USA	Editor	Harvard university
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	325
Permanent link to this record



	Author	Meledin, D.; Tong, C. Y.-E.; Blundell, R.; Kaurova, N.; Smirnov, K.; Voronov, B.; Gol'tsman, G.
	Title	The sensitivity and IF bandwidth of waveguide NbN hot electron bolometer mixers on MgO buffer layers over crystalline quartz			Type	Conference Article
	Year	2002	Publication	Proc. 13^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 13^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	65-72
	Keywords	waveguide NbN HEB mixers
	Abstract	We have developed and characterized waveguide phonon-cooled NbN Hot Electron Bolometer (FMB) mixers fabricated from a 3-4 nm thick NbN film deposited on a 200nm thick MgO buffer layer over crystalline quartz. Double side band receiver noise temperatures of 900-1050 K at 1.035 THz, and 1300-1400 K at 1.26 THz have been measured at an intermediate frequency of 1.5 GHz. The intermediate frequency bandwidth, measured at 0.8 THz LO frequency, is 3.2 GHz at the optimal bias point for low noise receiver operation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, MA, USA	Editor	Harvard university
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	326
Permanent link to this record



	Author	Cherednichenko, S.; Kroug, M.; Khosropanah, P.; Adam, A.; Merkel, H.; Kolberg, E.; Loudkov, D.; Voronov, B.; Gol'tsman, G.; Richter, H.; Hübers, H. W.
	Title	A broadband terahertz heterodyne receiver with an NbN HEB mixer			Type	Conference Article
	Year	2002	Publication	Proc. 13^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 13^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	85-95
	Keywords	NbN HEB mixers
	Abstract	We present a broadband and low noise heterodyne receiver for 1.4-1.7 THz designed for the Hershel Space Observatory. A phonon- cooled NbN HEB mixer was integrated with a normal metal double- slot antenna and an elliptical silicon lens. DSB receiver noise temperature Tr was measured from 1 GHz through 8GHz intermediate frequency band with 50 MHz instantaneous bandwidth. At 4.2 K bath temperature and at 1.6 THz LO frequency Tr is 800 K with the receiver noise bandwidth of 5 GHz. While at 2 K bath temperature Tr was as low as 700 K. At 0.6 THz and 1.1 THz a spiral antenna integrated NbN HEB mixer showed the receiver noise temperature 500 K and 800 K, though no antireflection coating was used in this case. Tr of 1100 K was achieved at 2.5 THz while the receiver noise bandwidth was 4 GHz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, MA, USA	Editor	Harward University
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	332
Permanent link to this record



	Author	Hajenius, M.; Baselmans, J. J. A.; Gao, J. R.; Klapwijk, T. M.; de Korte, P. A. J.; Voronov, B.; Gol’tsman, G.
	Title	Improved NbN phonon cooled hot electron bolometer mixers			Type	Conference Article
	Year	2003	Publication	Proc. 14^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 14^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	413-423
	Keywords	NbN HEB mixers
	Abstract	NbN phonon-cooled hot electron bolometer mixers (HEBs) have been realized with negligible contact resistance to Au pads. By adding either a 5 nm Nb or a 10 nm NbTiN layer between the Au and NbN, to preserve superconductivity in the NbN under the Au contact pad, superior noise temperatures have been obtained. Using DC I,V curves and resistive transitions in combination with process parameters we analyze the nature of these improved devices and determine interface transparencies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Tucson, USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	337
Permanent link to this record



	Author	Vachtomin, Y. B.; Antipov, S. V.; Maslennikov, S. N.; Smirnov, K. V.; Polyakov, S. L.; Kaurova, N. S.; Grishina, E. V.; Voronov, B. M.; Gol'tsman, G. N.
	Title	Noise temperature measurements of NbN phonon-cooled hot electron bolometer mixer at 2.5 and 3.8 THz			Type	Conference Article
	Year	2004	Publication	Proc. 15^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 15^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	236-241
	Keywords	HEB mixer, NbN, direct detection effect
	Abstract	We present the results of noise temperature measurements of NbN phonon-cooled HEB mixers based on a 3.5 nm NbN film deposited on a high-resistivity Si substrate with a 200 nm – thick MgO buffer layer. The mixer element was integrated with a log-periodic spiral antenna. The noise temperature measurements were performed at 2.5 THz and at 3.8 THz local oscillator frequencies for the 3 µm x 0.2 µm active area devices. The best uncorrected receiver noise temperatures found for these frequencies are 1300 K and 3100 K, respectively. A water vapour discharge laser was used as the LO source. We also present the results of direct detection contribution to the measured Y-factor and of a possible error of noise temperature calculation. This error was more than 8% for the mixer with in-plane dimensions of 2.4 x 0.16 µm 2 at the optimal noise temperature point. The use of a mesh filter enabled us to avoid the effect of direct detection and decrease optical losses by 0.5 dB. The paper is concluded by the investigation results of the mixer polarization response. It was shown that the polarization can differ from the circular one at 3.8 THz by more than 2 dB.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Northampton, Massachusetts, USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	344
Permanent link to this record



	Author	Kaurova, N. S.; Finkel, M. I.; Maslennikov, S. N.; Vahtomin, Yu. B.; Antipov, S. V.; Smirnov, K. V.; Voronov, B. M.; Gol'tsman, G. N.; Ilyin, K. S.
	Title	Submillimeter mixer based on YBa₂Cu₃O_7-x thin film			Type	Conference Article
	Year	2004	Publication	Proc. 1-st conf. Fundamental problems of high temperature superconductivity	Abbreviated Journal
	Volume		Issue		Pages	291
	Keywords	HTS, HEB mixer
	Abstract
	Address	Moscow-Zvenigorod
	Corporate Author				Thesis
	Publisher		Place of Publication	Moscow-Zvenigorod	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	355
Permanent link to this record



	Author	Лудков, Денис Николаевич
	Title	Терагерцовые смесители на горячих электронах из тонких сверхпроводниковых пленок NbN и NbTiN			Type	Manuscript
	Year	2005	Publication	М. МПГУ	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	HEB, detector, mixer
	Abstract
	Address
	Corporate Author				Thesis	Ph.D. thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	479
Permanent link to this record



	Author	Масленников, Сергей Николаевич
	Title	Смесители на эффекте электронного разогрева для терагерцового и инфракрасного диапазонов			Type	Manuscript
	Year	2007	Publication	М. МПГУ	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	HEB, detector, mixer, terahertz, THz, infrared, IR, direct detection effect, conversion loss
	Abstract
	Address
	Corporate Author				Thesis	Ph.D. thesis
	Publisher		Place of Publication		Editor
	Language	Russian	Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	481
Permanent link to this record



	Author	Vystavkin, A. N.
	Title	Estimation of noise equivalent power and design analysis of an andreev reflection hot-electron microbolometer for submillimeter radioastronomy			Type	Journal Article
	Year	1999	Publication	Rus. J. Radio Electron.	Abbreviated Journal	Rus. J. Radio Electron.
	Volume		Issue	10	Pages
	Keywords	HEB, detector, bolometer
	Abstract	Results of theoretical estimations and measurements of characteristics of an Andreev reflection hot-electron microbolometer for submillimeter radioastronomy made by different researchers are reviewed and analysed. Peculiarities and characteristics of the microbolometers using two types of microthermometer for measurement of the electron temperature increment under influence of the radiation: the SIN-junction and the transition-edge sensor (TES) with electrothermal feedback – are compared. Advantages of the microbolometer with the second type of the microthermometer when the TES is used simultaneously as the absorber of radiation are shown. Methods of achievement of the best noise equivalent power of the microbolometer in such version as well as methods of the matching the microbolometer with the incident radiation flow using planar antennas and with the channel of output signal measurement using a SQUID-picoammeter are considered.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	496
Permanent link to this record



	Author	Finkel, Matvey; Vachtomin, Yuriy; Antipov, Sereey; Drakinski, Vladimir; Kaurova, Natalia; Voronov, Boris; Goltsman, Greeory
	Title	Gain bandwidth and noise temperature of NbTiN HEB mixer			Type	Conference Article
	Year	2003	Publication	Proc. 14^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 14^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	276-285
	Keywords	NbTiN HEB mixer
	Abstract	We have determined that the gain bandwidth of phonon-cooled HEB mixer employing NbTiN films deposited on MgO layer over Si substrate is limited b y the escape of phonons to the substrate. The cut-off frequencies of 1 um long devices operating at T 71, based on 3.5 nm. 4 nm and 10 nm thick films amount to 400 Mk. 300 MHz, and 100 MHz, respectivel y . The gain bandwidth of 0.13 . um long devices fabricated from 3.5 nm thick film is larger and amounts to 0.8 GIL; at the optimal operating point and to 1.5 GIL: at larger bias. The increase of the gain bandwidth from 400 MHz up to 1.5 GH: with the change of bridge length is attributed to diffusion cooling. A double sideband noise temperature of 4000 K was obtained for heterodyne receiver utilizing pilot NbTiN HEB mixer (not optimized for normal state resistance) operating at the local oscillator frequency of 2.5 THz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1500
Permanent link to this record



	Author	Semenov, Alexei; Il'yin, Konstantin; Siegel, Michael; Smirnov, Andrey; Pavlov, Sergey; Richter, Heiko; Hübers, Heinz-Wilhelm
	Title	Intermediate frequency bandwidth of a hot-electron mixer: Comparision with bolometric models			Type	Conference Article
	Year	2006	Publication	Proc. 17^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	73-76
	Keywords	HEB
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris, France	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	537
Permanent link to this record



	Author	Kawamura, Jonathan; Blundell, Raymond; Tong, C.-Y. Edward; Papa, D. Cosmo; Hunter, Todd R.; Gol'tsman, Gregory; Cherednichenko, Sergei; Voronov, Boris; Gershenzon, Eugene
	Title	First light with an 800 GHz phonon-cooled HEB mixer receiver			Type	Conference Article
	Year	1998	Publication	Proc. 9^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 9^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	35-43
	Keywords	HEB, mixer, LO power, local oscillator power, saturation effect, dynamic range
	Abstract	Phonon-cooled superconductive hot-electron bolometric (HEB) mixers are incorporated in a waveguide receiver designed to operate near 800 Gliz. The mixer elements are thin-film nio- bium nitride microbridges with dimensions of 4 nm thickness, 0.2 to 0.3 p.m in length and 2 jun in width. At 780 GHz the best receiver noise temperature is 840 K (DSB). The mixer IF bandwidth is 2.0 GHz, the absorbed LO power is —0.1 1.1W. A fixed-tuned version of the re- ceiver was installed at the Submillimeter Telescope Observatory on Mt. Graham, Arizona, to conduct astronomical observations. These observations represent the first time that a receiver incorporating any superconducting HEB mixer has been used to detect a spectral line of celes- tial origin.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Pasadena, California, USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	572
Permanent link to this record



	Author	Cao, Aiqin; Jiang, L.; Chen, S.H.; Antipov, S.V.; Shi, S.C.
	Title	IF gain bandwidth of a quasi-optical NbN superconducting HEB mixer			Type	Conference Article
	Year	2007	Publication	Proc. International conference on microwave and millimeter wave technology	Abbreviated Journal	Proc. ICMMT
	Volume		Issue		Pages	1-3
	Keywords	HEB, mixer, gain bandwidth
	Abstract	In this paper, the intermediate frequency (IF) gain bandwidth of a quasi-optical NbN superconducting hot-electron bolometer (HEB) mixer is investigated at 500 GHz with an IF system incorporating with a frequency down-converting scheme which is able to sweep the IF signal in a frequency range of 0.3-4 GHz. The IF gain bandwidth of the device is measured to be 1.5 GHz when it is biased at a voltage of the minimum noise temperature, and becomes larger when the bias voltage increases.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Builin	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number	RPLAB @ lobanovyury @			Serial	575
Permanent link to this record



	Author	Ryabchun, S. A.; Tretyakov, I. V.; Finkel, M. I.; Maslennikov, S. N.; Kaurova, N. S.; Seleznev, V. A.; Voronov, B. M.; Gol'tsman, G. N.
	Title	NbN phonon-cooled hot-electron bolometer mixer with additional diffusion cooling			Type	Conference Article
	Year	2009	Publication	Proc. 20^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 20th ISSTT
	Volume		Issue		Pages	151-154
	Keywords	HEB, mixer, bandwidth, noise temperatue, in-situ contacts, in situ contacts
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Charlottesville, USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	590
Permanent link to this record



	Author	Tretyakov, I. V.; Ryabchun, S. A.; Maslennikov, S. N.; Finkel, M. I.; Kaurova, N. S.; Seleznev, V. A.; Voronov, B. M.; Gol'tsman, G.N.
	Title	NbN HEB mixer: fabrication, noise temperature reduction and characterization			Type	Conference Article
	Year	2008	Publication	Proc. Basic problems of superconductivity	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	HEB, mixer, noise temperature, conversion gain bandwidth
	Abstract	We demonstrate that in the terahertz region superconducting hot-electron mixers offer the lowest noise temperature, opening the possibility of using HTS's in the future to fabricate these devices. Specifically, a noise temperature of 950 K was measured for the receiver operating at 2.5 THz with a NbN HEB mixer, and a gain bandwidth of 6 GHz was measured at 300 GHz near Tc for the same mixer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Moscow-Zvenigorod	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	591
Permanent link to this record



	Author	Финкель, М. И.
	Title	Терагерцовые смесители на эффекте электронного разогрева в ультратонких плёнках NbN и NbTiN			Type	Manuscript
	Year	2006	Publication	М. МПГУ	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	HEB, detector, mixer, terahertz, THz, infrared, IR, direct detection effect, conversion bandwidth, conversion loss
	Abstract
	Address
	Corporate Author				Thesis	Ph.D. thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	597
Permanent link to this record



	Author	Рябчун, С. А.
	Title	Широкополосные высокостабильные терагерцовые смесители на горячих электронах из тонких сверхпроводниковых пленок NbN			Type	Manuscript
	Year	2009	Publication	М. МПГУ	Abbreviated Journal
	Volume		Issue		Pages	98
	Keywords	HEB, mixer, terahertz, THz, stability, Allan variance, conversion bandwidth, in-situ technique, Au contacts
	Abstract
	Address
	Corporate Author				Thesis	Ph.D. thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	598
Permanent link to this record



	Author	Nebosis, R. S.; Semenov, A. D.; Gousev, Yu. P.; Renk, K. F.
	Title	Rigorous analysis of a superconducting hot-electron bolometer mixer: theory and comparision with experiment			Type	Conference Article
	Year	1996	Publication	Proc. 7^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	601-613
	Keywords	HEB mixer, model, conversion gain, noise temperature, impedance, 2.5 THz
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Charlottesville, Virginia, USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	605
Permanent link to this record



	Author	Risacher, C.; Meledin, D.; Belitsky, V.; Bergman, P.
	Title	First 1.3 THz observations at the APEX telescope			Type	Conference Article
	Year	2009	Publication	Proc. 20^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	54-61
	Keywords	balanced HEB mixer noise temperature APEX telescope stability Allan variance aperture efficiency
	Abstract	The Atacama Pathfinder EXperiment (APEX) 12m telescope is operating on the Llano Chajnantor, Chile, since 2003 and a set of state of the art sub-millimeter receivers have been installed for frequencies spanning from 150 GHz to 1500 GHz. In 2008, a balanced 1.3 THz Hot Electron Bolometer (HEB) receiver was installed for the atmospheric window 1250-1380 GHz. This instrument is part of a 4-channel receiver cryostat with the other channels being 211-275 GHz, 275-370 GHz and 380-500 GHz Sideband Separating (SSB) SIS receivers. This paper presents the first observations obtained so far with the 1.3 THz band during its first months of operation. The sky measurements were taken during opportunistic commissioning and science verification phases, when the weather conditions were sufficiently good with a Precipitable Water Vapor (PWV) below 0.25 mm, which was the case only a few nights during these months. We present the first observations of the molecular transition CO J=(11-10) line on different sources such as Orion-FIR4, CW-Leo and SgrB2(M). We describe the many challenges and difficulties encountered for achieving successful THz observations from a large sub-millimeter ground-based telescope.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	619
Permanent link to this record



	Author	Karasik, Boris S.; Cantor, Robin
	Title	Optical NEP in hot-electron nanobolometers			Type	Journal Article
	Year	2010	Publication		Abbreviated Journal
	Volume		Issue		Pages	1-7
	Keywords	HEB, Ti, NEP, femtowatt, SAFARI, SPICA, 650 GHz, 0.65 THz, 460 um, twin slot antenna, SQUID readout
	Abstract	For the first time, we have measured the optical noise equivalent power (NEP) in titanium (Ti) superconducting hot-electron nanobolometers (nano-HEBs). The bolometers were 2{\mu}mx1{\mu}mx20nm and 1{\mu}mx1{\mu}mx20nm planar antenna-coupled devices. The measurements were done at {\lambda} = 460 {\mu}m using a cryogenic black body radiation source delivering optical power from a fraction of a femtowatt to a few 100s of femtowatts. A record low NEP = 3x10^{-19} W/Hz^{1/2} at 50 mK has been achieved. This sensitivity meets the requirements for SAFARI instrument on the SPICA telescope. The ways for further improvement of the nano-HEB detector sensitivity are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes	To appear in Proc. 21st Int. Symp. on Spc. THz Technol., Oxford, UK, 23-25 March, 2010			Approved	no
	Call Number				Serial	623
Permanent link to this record



	Author	de Lange, Gert; Krieg, Jean-Michel; Honingh, Netty; Karpov, Alexandre; Cherednichenko, Sergey
	Title	Performance of the HIFI flight mixers			Type	Conference Article
	Year	2008	Publication	Proc. 19^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	98-105
	Keywords	HEB mixer applications, HEB applications
	Abstract	We summarize the technology and final results of the superconducting heterodyne SIS and HEB mixers that are developed for the HIFI instrument. Within HIFI 7 frequency bands cover the frequency range from 480 GHz to 1910 GHz. We describe the different device technologies and optical coupling schemes that are used to cover the frequency bands. The efforts of the different mixer teams that participate in HIFI have contributed to an instrument that will have unprecedented sensitivity and frequency coverage.
	Address	Groningen
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1074
Permanent link to this record



	Author	Lobanov, Y.; Tong, C.; Blundell, R.; Gol'tsman, G.
	Title	A study of direct detection effect on the linearity of hot electron bolometer mixers			Type	Conference Article
	Year	2009	Publication	Proc. 20^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 20th ISSTT
	Volume		Issue		Pages	282-287
	Keywords	HEB mixer, direct detection effect
	Abstract	We have performed a study of how direct detection affects the linearity and hence the calibration of an HEB mixer. Two types of waveguide HEB devices have been used: a 0.8 THz HEB mixer and a 1.0 THz HEB mixer which is ~5 times smaller than the former. Two independent experimental approaches were used. In the Î”G/G method, the conversion gain of the HEB mixer is first measured as a function of the bias current for a number of bias voltages. At each bias setting, we carefully measure the change in the operating current when the input loads are switched. From the measured data, we can derive the expected difference in gain between the hot and cold loads. In the second method (injection method [1]), the linearity of the HEB mixer is independently measured by injecting a modulated signal for different input load temperatures. The results of both approaches confirm that there is gain compression in the operation of HEB mixers. Based on the results of our measurements, we discuss the impact of direct detection effects on the operation of HEB mixers.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number	RPLAB @ gujma @			Serial	724
Permanent link to this record



	Author	Lobanov, Y. V.; Tong, Cheuk-Yu E.; Hedden, A. S.; Blundell, R.; Gol'tsman, G. N.
	Title	Microwave-assisted슠measurement슠of the슠frequency슠response슠of슠terahertz슠HEB슠mixers슠with a슠fourier슠transform슠spectrometer			Type	Conference Article
	Year	2010	Publication	21st International Symposium on Space Terahertz Technology	Abbreviated Journal	21st ISSTT
	Volume		Issue		Pages	420-423
	Keywords	HEB mixer
	Abstract	We describe a novel method of operation of the HEB direct detector for use with a Fourier Transform Spectrometer. Instead of elevating the bath temperature, we have measured the RF response of waveguide HEB mixers by applying microwave radiation to select appropriate bias conditions. In our experiment, a microwave signal is injected into the HEB mixer via its IF port. By choosing an appropriate injection level, the device can be operated close to the desired operating point. Furthermore, we have shown that both thermal biasing and microwave injection can reproduce the same spectral response of the HEB mixer. However, with the use of microwave injection, there is no need to wait for the mixer to reach thermal equilibrium, so characterisation can be done in less time. Also, the liquid helium consumption for our wet cryostat is also reduced. We have demonstrated that the signalto-noise ratio of the FTS measurements can be improved with microwave injection.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number	RPLAB @ gujma @			Serial	725
Permanent link to this record



	Author	Ожегов, Роман Викторович
	Title	Флуктуационная чувствительность и стабильность приемников с СИС и HEB смесителями для терагерцового тепловидения			Type	Journal Article
	Year	2011	Publication	Радиофизика	Abbreviated Journal
	Volume		Issue		Pages	135
	Keywords	HEB
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number	RPLAB @ gujma @			Serial	731
Permanent link to this record



	Author	Shurakov, Alexander; Tong, Edward; Blundell, Raymond; Gol'tsman, Gregory
	Title	Microwave stabilization of HEB mixer by a microchip controller			Type	Conference Article
	Year	2012	Publication	IEEE MTT-S international microwave symposium digest	Abbreviated Journal
	Volume		Issue		Pages	1-3
	Keywords	HEB mixer stability, microwave injection, Allan variance, Allan time
	Abstract	The stability of a Hot Electron Bolometer (HEB) mixer can be improved by the use of microwave injection. In this article we report a refinement of this approach. We introduce a microchip controller to facilitate the implementation of the stabilization scheme, and demonstrate that the feedback loop effectively suppresses drifts in the HEB bias current, leading to an improvement in the receiver stability. The measured Allan time of the mixer's IF output power is increased to > 10 s.
	Address	Montreal, QC, Canada
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	857
Permanent link to this record



	Author	Khosropanah, P.; Merkel, H.; Yngvesson, S.; Adam, A.; Cherednichenko, S.; Kollberg, E.
	Title	A distributed device model for phonon-cooled HEB mixers predicting IV characteristics, gain, noise and IF bandwidth			Type	Conference Article
	Year	2000	Publication	Proc. 11^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	474-488
	Keywords	HEB mixer numerical model, diffusion cooling channel, diffusion channel, distributed HEB model, distributed model
	Abstract	A distributed model for phonon-cooled superconductor hot electron bolometer (HEB) mixers is given, which is based on solving the one-dimensional heat balance equation for the electron temperature profile along the superconductor strip. In this model it is assumed that the LO power is absorbed uniformly along the bridge but the DC power absorption depends on the local resistivity and is thus not uniform. The electron temperature dependence of the resistivity is assumed to be continuous and has a Fermi form. These assumptions are used in setting up the non-linear heat balance equation, which is solved numerically for the electron temperature profile along the bolometer strip. Based on this profile the resistance of the device and the IV curves are calculated. The IV curves are in excellent agreement with measurement results. Using a small signal model the conversion gain of the mixer is obtained. The expressions for Johnson noise and thermal fluctuation noise are derived. The calculated results are in close agreement with measurements, provided that one of the parameters used is adjusted.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	University of Michigan, Ann Arbor, MI USA	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	893
Permanent link to this record



	Author	Kooi, Jacob Willem
	Title	Advanced receivers for submillimeter and far infrared astronomy			Type	Book Whole
	Year	2008	Publication	University of Groningen	Abbreviated Journal	RUG
	Volume		Issue		Pages
	Keywords	HEB, SIS, TES, NEP, noise temperature, IF bandwidth, waveguide, impedance, conversion gain, FTS, integrated array, stability, Allan variance, multi-layer antireflection coating
	Abstract
	Address
	Corporate Author				Thesis	Doctoral thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN	978-90-367-3653-4	Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	881
Permanent link to this record



	Author	Ynvesson, K. Sigfrid; Kollberg, Erik L.
	Title	Optimum receiver noise temperature for NbN HEB mixers according to standard model			Type	Conference Article
	Year	1999	Publication	Proc. 10^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	566-582
	Keywords	HEB mixer model, standard model, electro-thermal feedback, self-heating parameter, heating efficiency
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	895
Permanent link to this record



	Author	Khosropanah, Pourya
	Title	NbN and NbTiN hot electron bolometer THz mixers			Type	Book Whole
	Year	2003	Publication	Chalmers University of Technology	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	HEB mixer, hot electron bolometer mixer, NbN, NbTiN, superconducting detector, heterodyne receiver, THz mixer, submillimeter mixer, quasioptical receiver, double slot antenna, twin slot antenna, spiral antenna, receiver noise, FTS, Fourier Transform Spectrometer
	Abstract	The thesis reports the development of Hot Electron Bolometer (HEB) mixers for radio astronomy heterodyne receivers in THz frequency range. Part of this work is the fabrication of HEB devices, which are based on NbN or NbTiN superconducting thin films (â‰<a4>5 nm). They are integrated with wideband spiral or double-slot planar antennas. The mixer chips are incorporated into a quasi-optical receiver. The experimental part of this work focuses on the characterization of the receiver as a whole, and the HEB mixers as a part. Double side band receiver noise temperature and the IF bandwidth are reported for frequencies from 0.7 THz up to 2.6 THz. The spectrum of the direct response of HEB integrated with dierent antennas are measured using Fourier Transform Spectrometer (FTS). The effect of the bolometer size on total receiver performance and the LO power requirements is also discussed. A high-yield and reliable process for fabrication of NbN HEB mixers have been achieved. Over 100 devices with different bolometer geometry, film property and also different antennas have been fabricated and measured. The measured data enables us to discuss the impact of different parameters to the receiver overall performance. This work has provided NbN HEB mixers to the following receivers: TREND (Terahertz REceiver with NbN HEB Device) operating at 1.25-1.5 THz, installed in AST/RO Submillimeter Wave Telescope, Amundsen/Scott South Pole Station, in 2002-2003. Band 6-low (1.410-1.700 THz) and 6-high (1.700-1.920 THz) of the HIFI (Heterodyne Instrument for Far Infra-red) in the Herschel Space Observatory, due to launch in 2007 by ESA (European Space Agency). Besides, there has been continuous efforts to develop better models to explain the mixer performance more accurately. They are based on two temperature model for electrons and phonons and solving one-dimensional heat balance equations along the bolometer. The principles of these models are illustrated and the calculated results are compared with measured data.
	Address
	Corporate Author				Thesis	Ph.D. thesis
	Publisher	Chalmers University of Technology	Place of Publication	Göteborg	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	910
Permanent link to this record



	Author	Kawamura, J.; Blundell, R.; Tong, C.-Y. E.; Golts'man, G.; Gershenzon, E.; Voronov B.
	Title	Superconductive NbN hot-electron bolometric mixer performance at 250 GHz			Type	Conference Article
	Year	1996	Publication	Proc. 7^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 7^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	331-336
	Keywords	NbN HEB mixers
	Abstract	Thin film NbN (<40 A) strips are used as waveguide mixer elements. The electron cooling mechanism for the geometry is the electron-phonon interaction. We report a receiver noise temperature of 750 K at 244 GHz, with / IF = 1.5 GHz, Af= 500 MHz, and Tphysical = 4 K. The instantaneous bandwidth for this mixer is 1.6 GHz. The local oscillator (LO) power is 0.5 1.tW with 3 dB-uncertainty. The mixer is linear to 1 dB up to an input power level 6 dB below the LO power. We report the first detection of a molecular line emission using this class of mixer, and that the receiver noise temperature determined from Y-factor measurements reflects the true heterodyne sensitivity.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	945
Permanent link to this record



	Author	Palma, F.; Teppe, F.; Fatimy, A. E.; Green, R.; Xu, J.; Vachontin, Y.; Tredicucci, A.; Goltsman, G.; Knap, W.
	Title	THz communication system based on a THz quantum cascade laser and a hot electron bolometer			Type	Conference Article
	Year	2010	Publication	35th Int. Conf. Infrared, Millimeter, and Terahertz Waves	Abbreviated Journal	35th Int. Conf. Infrared, Millimeter, and Terahertz Waves
	Volume		Issue		Pages	11623798 (1 to 2)
	Keywords	QCL, HEB detector
	Abstract	We present the experimental study of the direct emission – detection system based on the THz Quantum Cascade Laser as a source and Hot Electron Bolometer (HEB) detector – in view of its application as an optical communication system. We show that the system can efficiently transmit the QCL Terahertz pulses. We estimate the maximal modulation speed of the system to be about several GHz and show that it is limited only by the QCL pulse power supply, detector amplifier and connection line/wires parameters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1391
Permanent link to this record



	Author	Titova, N; Kardakova, A.; Tovpeko, N; Ryabchun, S.; Mandal, S.; Morozov, D.; Klemencic, G. M.; Giblin, S.R.; Williams, O. A.; Goltsman, G. N.
	Title	Superconducting diamond films as perspective material for direct THz detectors			Type	Abstract
	Year	2017	Publication	Proc. 28^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 28^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	82
	Keywords	KID, HEB, superconducting diamond films, boron-doped diamond films, Al, TiN, Si substrates, NEP
	Abstract	Superconducting films with a high resistivity in the normal state have established themselves as the best materials for direct THz radiation sensors, such as kinetic inductance detectors (KIDs) [1] and hot electron bolometers (nano-HEBs) [2]. The primary characteristics of the future instrument such as the sensitivity and the response time are determined by the material parameters such as the electron-phonon (e-ph) interaction time, the electron density and the resistivity of the material. For direct detectors, such as KIDs and nano-HEBs, to provide a high sensitivity and low noise one prefer materials with long e-ph relaxation times and low values of the electron density. As a potential material for THz radiation detection we have studied superconducting diamond films. A significant interest to diamond for the development of electronic devices is due to the evolution of its properties with the boron dopant concentration. At a high boron doping concentration, n B ~5·10 20 cm -3 , diamond has been reported to become a superconducting with T c depending on the doping level. Our previous study of energy relaxation in single-crystalline boron-doped diamond films epitaxially grown on a diamond shows a remarkably slow energy-relaxation at low temperatures. The electron-phonon cooling time varies from 400 ns to 700 ns over the temperature range 2.2 K to 1.7 K [3]. In superconducting materials such as Al and TiN, traditionally used in KIDs, the e-ph cooling times at 1.7 K correspond to ~20 ns [4] and ~100 ns [5], correspondingly. Such a noticeable slow e-ph relaxation in boron-doped diamond, in combination with a low value of carrier density (~10 21 cm -3 ) in comparison with typical metals (~10 23 cm -3 ) and a high normal state resistivity (~1500 μΩ·cm) confirms a potential of superconducting diamond for superconducting bolometers and resonator detectors. However, the price and the small substrate growth are of single crystal diamond limit practical applications of homoepitaxial diamond films. As an alternative way with more convenient technology, one can employ heteroepitaxial diamond films grown on large-size Si substrates. Here we report about measurements of e-ph cooling times in superconducting diamond grown on silicon substrate and discuss our expectations about the applicability of boron-doped diamond films to superconducting detectors. Our estimation of limit value of noise-equivalent power (NEP) and the energy resolution of bolometer made from superconducting diamond is order 10 -17 W/Hz 1/2 at 2 K and the energy resolution is of 0.1 eV that corresponds to counting single-photon up to 15 um. The estimation was obtained by using the film thickness of 70 nm and ρ ~ 1500 μΩ·cm, and the planar dimensions that are chosen to couple bolometer with 75 Ω log-spiral antenna. Although the value of NEP is far yet from what might like to have for certain astronomical applications, we believe that it can be improved by a suitable fabrication process. Also the direct detectors, based on superconducting diamond, will offer low noise performance at about 2 K, a temperature provided by inexpensive close-cycle refrigerators, which provides another practical advantage of development and application of these devices. [1] P.K. Day, et. al, Nature, 425, 817, 2003. [2] J. Wei, et al, Nature Nanotech., 3, 496, 2008. [3] A. Kardakova, et al, Phys. Rev. B, 93, 064506, 2016. [4] P. Santhanam and D. Prober, Phys. Rev. B, 29, 3733, 1984 [5] A. Kardakova, et al, Appl. Phys. Lett, vol. 103, p. 252602, 2013.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1173
Permanent link to this record



	Author	Ozhegov, R. V.; Smirnov, A. V.; Vakhtomin, Yu. B.; Smirnov, K. V.; Divochiy, A. V.; Goltsman, G. N.
	Title	Ultrafast superconducting bolometer receivers for terahertz applications			Type	Abstract
	Year	2009	Publication	Proc. PIERS	Abbreviated Journal	Proc. PIERS
	Volume		Issue		Pages	867
	Keywords	HEB
	Abstract	The research by the group of Moscow State Pedagogical University into the hot-electron phenomena in thin superconducting films has led to the development of new types of detectors and their use both in fundamental and applied studies. In this paper, we present the results of testing the terahertz HEB receiver systems based on ultrathin (∼ 4 nm) NbN and MoRe detectors with a response time of 50 ps and 1 ns, respectively. We have developed three types of devices which differ in the way a terahertz signal is coupled to the detector and cover the following ranges: 0.3–3 THz, 0.1–30 THz and 25–70 THz. In the case of the receiving system optimized for 0.3–3 THz, the sensitive element (a strip of asuperconductor with planar dimensions of 0.2μm (length) by 1.7μm (width)) was integrated witha planar broadband log-spiral antenna. For additional focusing ofthe incident radiation a silicon hyperhemispherical lens was used. For the 0.1–30 THz receivingsystem, the sensitive element was patterned as parallel strips(2μm wide each) filling an area of 500×500μm2with a filling factor of 0.5. In the receivingsystem of this type we used direct coupling of the incident radiation to the sensitive element. Inthe 25–70 THz range (detector type 2/2a in Table 1) we used a square-shaped superconductingdetector with planar dimensions of 10×10μm2. Incident radiation was coupled to the detectorwith the use of a germanium hyperhemispherical lens.The response time of the above receiving systems is determined by the cooling rate of the hotelectrons in the film. That depends on the electron-phonon interaction time, which is less forultrathin NbN than in MoRe.
	Address	Moscow, Russia
	Corporate Author				Thesis
	Publisher	The Electromagnetics Academy	Place of Publication	777 Concord Avenue, Suite 207 Cambridge, MA 02138	Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1559-9450	ISBN	978-1-934142-09-7	Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number	RPLAB @ sasha @ ozhegovultrafast			Serial	1022
Permanent link to this record



	Author	Smirnov, K. V.; Vakhtomin, Yu. B.; Divochiy, A. V.; Ozhegov, R. V.; Pentin, I. V.; Gol'tsman, G. N.
	Title	Infrared and terahertz detectors on basis of superconducting nanostructures			Type	Conference Article
	Year	2010	Publication	Microwave and Telecom. Technol. (CriMiCo), 20th Int. Crimean Conf.	Abbreviated Journal
	Volume		Issue		Pages	823-824
	Keywords	SSPD, SNSPD, HEB
	Abstract	Results of development of single-photon receiving systems of visible, infrared and terahertz range based on thin-film superconducting nanostructures are presented. The receiving systems are produced on the basis of superconducting nanostructures, which function by means of hot-electron phenomena.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor	IEEE
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number	RPLAB @ sasha @ smirnov2010infrared			Serial	1025
Permanent link to this record



	Author	Goltsman, G. N.; Korneev, A. A.; Finkel, M. I.; Divochiy, A. V.; Florya, I. N.; Korneeva, Y. P.; Tarkhov, M. A.; Ryabchun, S. A.; Tretyakov, I. V.; Maslennikov, S. N.; Kaurova, N. S.; Chulkova, G. M.; Voronov, B. M.
	Title	Superconducting hot-electron bolometer as THz mixer, direct detector and IR single-photon counter			Type	Abstract
	Year	2010	Publication	35th Int. Conf. Infrared, Millimeter, and Terahertz Waves	Abbreviated Journal
	Volume		Issue		Pages	1-1
	Keywords	SSPD, SNSPD, HEB
	Abstract	We present a new generation of superconducting single-photon detectors (SSPDs) and hot-electron superconducting sensors with record characteristic for many terahertz and optical applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2162-2027	ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number	RPLAB @ sasha @ goltsman2010superconducting			Serial	1028
Permanent link to this record



	Author	Zhang, W.; Miao, W.; Zhong, J. Q.; Shi, S. C.; Hayton, D. J.; Vercruyssen, N.; Gao, J. R.; Goltsman, G. N.
	Title	Temperature dependence of superconducting hot electron bolometers			Type	Conference Article
	Year	2013	Publication	Not published results: 24^th international symposium on space terahertz technology	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	HEB
	Abstract
	Address	Groningen,The Netherlands
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1067
Permanent link to this record



	Author	Semenov, A.; Richter, H.; Hübers, H.-W.; Petrenko, D.; Tretyakov, I.; Ryabchun, S.; Finkel, M.; Kaurova, N.; Gol’tsman, G.; Risacher, C.; Ricken, O.; Güsten, R.
	Title	Optimization of the intermediate frequency bandwidth in the THz HEB mixers			Type	Abstract
	Year	2014	Publication	Proc. 25^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 25^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	54
	Keywords	NbN HEB mixer
	Abstract	We report on the studies of the intermediate frequency (IF) bandwidth of quasi-optically coupled NbN hot-electron bolometer (HEB) mixers which are aimed at the optimization of the mixer performance at terahertz frequencies. Extension of the IF bandwidth due to the contribution of electron diffusion to the heat removal from NbN microbolometers has been already demonstrated for NbN HEBs at subterahertz frequencies. However, reducing the size of the microbolometer causes degradation of the noise temperature. Using in-situ multilayer manufacturing process we succeeded to improve the transparency of the contacts for electrons which go away from microbolometer to the metallic antenna. The improved transparency and hence coupling efficiency counterbalances the noise temperature degradation. HEB mixers were tested in a laboratory heterodyne receiver with a narrow-band cold filter which allowed us to eliminate direct detection. We used a local oscillator with a quantum cascade laser (QCL) at a frequency of 4.745 THz [1] which was developed for the H-Channel of the German Receiver for Astronomy at Terahertz frequencies (GREAT). Both the noise and gain bandwidth were measured in the IF range from 0.5 to 8 GHz using the hot-cold technique and preliminary calibrated IF analyzer with a tunable microwave filter. For optimized HEB geometry we found the noise bandwidth as large as 7 GHz. We compare our results with the conventional and the hot-spot mixer models and show that further extension of the IF bandwidth should be possible via improving the sharpness of the superconducting transition. The cross characterization of the HEB mixer was performed in the test bed of GREAT at the Max-Planck-Institut für Radioastronomie with the same QCL LO and delivered results which were consistent with the laboratory studies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1359
Permanent link to this record



	Author	Shcherbatenko, Michael; Lobanov, Yury; Benderov, Oleg; Shurakov, Alexander; Ignatov, Anton; Titova, Nadezhda; Finkel, Matvey; Maslennikov, Sergey; Kaurova, Natalya; Voronov, Boris M.; Rodin, Alexander; Klapwijk, Teunis M.; Gol'tsman, Gregory N.
	Title	Antenna-coupled 30 THz hot electron bolometer mixers			Type	Conference Article
	Year	2015	Publication	Proc. 26^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 26^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	27
	Keywords	HEB mixer, IR, mid-IR, 30 THz, antenna-coupled
	Abstract	We report on design and characterization of a superconducting Hot Electron Bolometer Mixer integrated with a logarithmic spiral antenna for mid-IR range observations. The antenna parameters have been adjusted to achieve the ultimate performance at 10 µm (30 THz) range where O3, NH3, CO2, CH4, N2O,…. lines in the Earth’s atmosphere, in planetary atmospheres and in the interstellar space can be observed. The HEB mixer is made of a thin NbN film deposited onto a GaAs substrate. To couple the radiation we rely on the quasioptical approach: the device is glued to a semi-spherical germanium lens with diameter~ 3 mm. A wet cryostat equipped with a germanium window and narrow band-pass filter is used to characterize the antenna and estimate the mixer performance.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1157
Permanent link to this record



	Author	Shurakov, Alexander; Maslennikov, Sergey; Tong, Cheuk-yu E.; Gol’tsman, Gregory
	Title	Performance of an HEB direct detector utilizing a microwave reflection readout scheme			Type	Conference Article
	Year	2015	Publication	Proc. 26^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 26^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	36
	Keywords	HEB detector
	Abstract	We report the results of our study on the performance of a hot electron bolometric (HEB) direct detector, operated by a microwave pump. The HEB devices used in this work were made from NbN thin film deposited on high resistivity silicon with an in-situ fabrication process. The experimental setup employed is similar to the one described in [1]. The detector chips were glued to a silicon lens clamped to a copper holder mounted on the cold plate of a liquid helium cryostat. Thermal link between the lens and the holder was maintained by a thin indium shim. The HEBs were operated at a bath temperature of about 4.4 K. Conventional phonon pump, commonly realized by raising the bath temperature of the detector, was substituted by a microwave one. In this case, a CW microwave signal is injected to the device through a directional coupler connected directly to the detector holder. The power incident on the HEB device was typically 1-2 μW, and the pump frequency was in the range of 0.5-1.5 GHz. The signal sources were 2 black bodies held at temperatures of 295 K and 77 K. A chopper wheel placed in front of the cryostat window switched the input to the detector between the 2 sources. A modulation frequency of several kilohertz was chosen in order to reduce the effects of the HEB’s flicker noise. A cold mesh filter was used to define the input bandwidth of the detector. The reflected microwave signal from the HEB device was fed into a low noise amplifier, the output of which is connected to a room temperature Schottky microwave power detector. This Schottky detector, in conjunction with a lock-in amplifier, demodulated the input signal modulation from the copper wheel. As the input load was switched, the impedance of the HEB device at the microwave pump frequency also changed in response to the incident signal power variation. Therefore the reflected microwave power follows the incident signal modulation. The derived responsivity from this detection system nicely correlates with the HEB impedance. In order to provide a quantitative description of the impedance variation of the HEB device and the impact of a microwave pump, we have numerically solved the heat balance equations written for the NbN bridge and its surrounding thermal heat sink [2]. Our model also accounts for the impact of the operating frequency of the detector because of non-uniform absorption of low-frequency photons across the NbN bridge [3]. In our measurements we varied the signal source wavelength from 2 mm down to near infrared range, and hence we indirectly performed the impedance measurements at frequencies below, around and far beyond the superconducting gap. Preliminary results show good agreement between the experiment and theoretical prediction. Further measurements are still in progress. [1] A. Shurakov et al., “A Microwave Reflection Readout Scheme for Hot Electron Bolometric Direct Detector”, to appear in IEEE Trans. THz Sci. Tech., 2015. [2] S. Maslennikov, “RF heating efficiency of the terahertz superconducting hot-electron bolometer”, http://arxiv.org/pdf/1404.5276v5.pdf, 2014. [3] W. Miao et al., “Non-uniform absorption of terahertz radiation on superconducting hot electron bolometer microbridges”, Appl. Phys. Let., 104, 052605, 2014.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1158
Permanent link to this record



	Author	Tretyakov, I.; Maslennikov, S.; Semenov, A.; Safir, O.; Finkel, M.; Ryabchun, S.; Kaurova, N.; Voronov, B.; Goltsman, G.; Klapwijk, T. M.
	Title	Impact of operating conditions on noise and gain bandwidth of NbN HEB mixers			Type	Conference Article
	Year	2015	Publication	Proc. 26^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 26^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	39
	Keywords	NbN HEB mixers
	Abstract	Hot-electron bolometer mixers (HEB’s) are the most promising devices as mixing element for terahertz spectroscopy and astronomy at frequencies beyond 1.4 THz. They have a low noise temperature and low demands on local oscillator (LO) power. 1,2 An important limitation is the IF bandwidth, of the order of a few GHz, and which in principle depends on energy relaxation due to electron- phonon processes and on diffusion-cooling. It has been proposed by Prober that a reduction in length of the HEB would lead to an increased bandwidth. 3 This appeared to be achieved by Tretyakov et al by measuring the gain bandwidth close to the critical temperature of the NbN. 2 Unfortunately, the noise bandwidth of similar devices operated at temperatures around 4.2 K appear not depend on the length. The fundamental problem to be addressed is the position-dependent superconducting state of the HEB- devices under operating conditions, which determines the conditions for the cooling of the hot quasiparticles. Some progress has been made by Barends et al in a semi-empirical model to describe the I,V curves under operating conditions at a bath temperature around 4.2 K. 4 In more recent work Vercruyssen et al have analyzed the I,V curve, without any LO-equivalent bias, of a model NSN system. 5 This work suggests that the most appropriate model for an HEB under operating conditions is that of a potential-well in the superconducting gap in the center of the NbN, analogous the bimodal superconducting state described by Vercruyssen et al. Hot quasiparticles in the well can not diffuse out and can only cool by electron-phonon processes, those with higher energies than the heights of the walls of the well can diffuse out. Using this working hypothesis we have carried out experiments on a sub-micrometer NbN bridge connected to a gold (Au) planar spiral antenna. An in situ process is used to deposit Au on NbN. The Au is removed in the center to define the uncovered NbN, which will act as the superconducting mixer itself. The antenna is deposited on the remaining Au layer on the NbN. The Au contacts suppress the energy gap of the NbN film located underneath the gold layer 7,8 . The measured resistive transition is shown in Fig.1. It clearly shows a T c of the bilayer at 6.2 K and the resistive transition of the NbN itself around 9 K. In addition we show the measured noise bandwidth (red squares) for different bath temperatures. Clearly the noise bandwidth increases strongly by increasing the bath temperature from 5 K to 8 K, up to 13 GHz. We interpret this pattern as evidence for improved out-diffusion of hot electrons due to normal banks and a shallow superconducting potential well compared to k B T. As expected the noise temperature in this regime is much bigger than when biased at 4.2 K. R EFERENCES 1 W. Zhang, P. Khosropanah, J. R. Gao, E. L. Kollberg, K. S. Yngvesson, T. Bansal, R. Barends, and T. M. Klapwijk Appl. Phys. Lett. 96, 111113, (2010). 2 Ivan Tretyakov, Sergey Ryabchun, Matvey Finkel, Anna Maslennikova, Natalia Kaurova, Anastasia Lobastova, Boris Voronov, and Gregory Gol’tsman Appl. Phys. Lett. 98, 033507 (2011). 3 D. E. Prober, Appl. Phys. Lett. 62, 2119 (1992). 4 R. Barends, M. Hajenius, J. R. Gao, and T. M. Klapwijk, Appl. Phys. Lett. 87, 263506 (2005). 5 N. Vercruyssen, T. G. A. Verhagen, M. G. Flokstra, J. P. Pekola, and T. M. Klapwijk Physical Review B 85, 224503 (2012).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1159
Permanent link to this record



	Author	Trifonov, Andrey; Tong, C. Edward; Lobanov, Yury; Kaurova, Natalia; Blundell, Raymond; Gol’tsman, Gregory
	Title	An investigation of the DC and IF performance of silicon-membrane HEB mixer elements			Type	Conference Article
	Year	2015	Publication	Proc. 26^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 26^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	40
	Keywords	silicon-membrane HEB waveguide mixer
	Abstract	We report on our initial development towards a 2x2 multi-pixel HEB waveguide mixer for operation at 1.4 THz. We have successfully fabricated devices comprising an NbN bridge integrated with antenna test structure using a silicon membrane as the supporting substrate. DC measurements of the test chips demonstrate critical current from 0.1 – 1mA depending on the size of device, with T c of around 10 K and ΔTc ~ 0.8 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1160
Permanent link to this record



	Author	Seliverstov, Sergey V.; Rusova, Anastasia A.; Kaurova, Natalya S.; Voronov, Boris M.; Goltsman, Gregory N.
	Title	AC-biased superconducting NbN hot-electron bolometer for frequency-domain multiplexing			Type	Conference Article
	Year	2017	Publication	Proc. 28^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 28^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	120-122
	Keywords	NbN HEB mixer
	Abstract	We present the results of characterization of fast and sensitive superconducting antenna-coupled THz direct detector based on NbN hot-electron bolometer (HEB) with AC-bias. We discuss the possibility of implementation of the AC-bias for design the readout system from the multi-element arrays of HEBs using standard technique of frequency-domain multiplexing. We demonstrate experimentally that this approach does not lead to significant deterioration of the HEB sensitivity compared with the value obtained for the same detector with DC- bias. Results of a numerical calculations of the HEB responsivity at AC-bias are in a good agreement with the experiment.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1174
Permanent link to this record



	Author	Antipov, S.; Trifonov, A.; Krause, S.; Meledin, D.; Desmaris, V.; Belitsky, V.; Gol’tsman, G.
	Title	Gain bandwidth of NbN HEB mixers on GaN buffer layer operating at 2 THz local oscillator frequency			Type	Conference Article
	Year	2017	Publication	Proc. 28^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 28^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	147-148
	Keywords	NbN HEB mixers, GaN buffer-layer, IF bandwidth
	Abstract	In this paper, we present IF bandwidth measurement results of NbN HEB mixers, which are employing NbN thin films grown on a GaN buffer-layer. The HEB mixers were operated in the heterodyne regime at a bath temperature of approximately 4.5 K and with a local oscillator operating at a frequency of 2 THz. A quantum cascade laser served as the local oscillator and a reference synthesizer based on a BWO generator (130-160 GHz) and a semiconductor superlattice (SSL) frequency multiplier was used as a signal source. By changing the LO frequency it was possible to record the IF response or gain bandwidth of the HEB with a spectrum analyzer at the operation point, which yielded lowest noise temperature. The gain bandwidth that was recorded in the heterodyne regime at 2 THz amounts to approximately 5 GHz and coincides well with a measurement that has been performed at elevated bath temperatures and lower LO frequency of 140 GHz. These findings strongly support that by using a GaN buffer-layer the phonon escape time of NbN HEBs can be significantly lower as compared to e.g. Si substrate, thus, providing higher gain bandwidth.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1175
Permanent link to this record



	Author	Krause, S.; Mityashkin, V.; Antipov, S.; Gol'tsman, G.; Meledin, D.; Desmaris, V.; Belitsky, V.; Rudzinski, M.
	Title	Study of IF bandwidth of NbN hot electron bolometers on GaN buffer layer using a direct measurement method			Type	Conference Article
	Year	2016	Publication	Proc. 27^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	30-32
	Keywords	NbN HEB, GaN buffer layer
	Abstract	In this paper, we present a reliable measurement method to study the influence of the GaN buffer layer on phonon-escape time in comparison with commonly used Si substrates and, in consequence, on the IF bandwidth of HEBs. One of the key aspects is to operate the HEB mixer at elevated bath temperatures close to the critical temperature of the NbN ultra-thin film, where contributions from electron-phonon processes and self-heating effects are relatively small, therefore IF roll-off will be governed by the phonon-escape.Two independent experiments were performed at GARD and MSPU on a similar experimental setup at frequencies of approximately 180 and 140 GHz, respectively, and have shown reproducible and consistent results. The entire IF chain was characterized by S-parameter measurements. We compared the measurement results of epitaxial NbN grown onto GaN buffer-layer with Tc of 12.5 K (4.5nm) with high quality polycrystalline NbN films on Si substrate with Tc of 10.5K (5nm) and observed a strong indication of an enhancement of phonon escape to the substrate by a factor of two for the NbN/GaN material combination.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1202
Permanent link to this record



	Author	Trifonov, A.; Tong, C.-Y. E.; Lobanov, Y.; Kaurova, N.; Blundell, R.; Goltsman, G.
	Title	Gap frequency and photon absorption in a hot electron bolometer			Type	Conference Article
	Year	2016	Publication	Proc. 27^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 27^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	121
	Keywords	NbN HEB; Si membrane
	Abstract	The superconducting energy gap is a crucial parameter of a superconductor when used in mixing applications. In the case of the SIS mixer, the mixing process is efficient for frequencies below the energy gap, whereas, in the case of the HEB mixer, the mixing process is most efficient at frequencies above the gap, where photon absorption takes place more readily. We have investigated the photon absorption phenomenon around the gap frequency of HEB mixers based on NbN films deposited on silicon membranes. Apart from studying the pumped I-V curves of HEB devices, we have also probed them with microwave radiation, as previously described [1]. At frequencies far below the gap frequency, the pumped I-V curves show abrupt switching between the superconducting and resistive states. For the NbN HEB mixers we tested, which have critical temperatures of ~9 K, this is true for frequencies below about 400 GHz. As the pump frequency is increased beyond 400 GHz, the resistive state extends towards zero bias and at some point a small region of negative differential resistance appears close to zero bias. In this region, the microwave probe reveals that the device impedance is changing randomly with time. As the pump frequency is further increased, this random impedance change develops into relaxation oscillations, which can be observed by the demodulation of the reflected microwave probe. Initially, these oscillations take the form of several frequencies grouped together under an envelope. As we approach the gap frequency, the multiple frequency relaxation oscillations coalesce into a single frequency of a few MHz. The resultant square-wave nature of the oscillation is a clear indication that the device is in a bi-stable state, switching between the superconducting and normal state. Above the gap frequency, it is possible to obtain a pumped I-V curve with no negative differential resistance above a threshold pumping level. Below this pumping level, the device demonstrates bi-stability, and regular relaxation oscillation at a few MHz is observed as a function of pump power. The threshold pumping level is clearly related to the amount of power absorbed by the device and its phonon cooling. From the above experiment, we can derive the gap frequency of the NbN film, which is 585 GHz for our 6 μm thin silicon membrane-based device. We also confirm that the HEB mixer is not an efficient photon absorber for radiation below the gap frequency. 1. A. Trifonov et al., “Probing the stability of HEB mixers with microwave injection”, IEEE Trans. Appl. Supercond., vol. 25, no. 3, June 2015.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1204
Permanent link to this record



	Author	Tretyakov, Ivan; Kaurova, N.; Voronov, B. M.; Goltsman, G. N.
	Title	About effect of the temperature operating conditions on the noise temperature and noise bandwidth of the terahertz range NbN hot-electron bolometers			Type	Abstract
	Year	2018	Publication	Proc. 29^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 29^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	113
	Keywords	NbN HEB mixer
	Abstract	Results of an experimental study of the noise temperature (Tn) and noise bandwidth (NBW) of the superconductor NbN hot-electron bolometer (HEB) mixer as a function of its temperature (Tb) and NbN bridge length are presented. It was determined that the NBW of the mixer is significantly wider at temperatures close to the critical ones (Tc) than are values measured at 4.2 K. The NBW of the mixer measured at the heterodyne frequency of 2.5 THz at temperature Tb close to Tc was ~13 GHz, as compared with 6 GHz at Tb = 4.2 K. This experiment clearly demonstrates the limitation of the thermal flow from the NbN bridge at Tb ≪ Tc for mixers manufactured by the in situ technique. This limitation is close in its nature to the Andreev reflection on the superconductor/metal boundary. In this case, the noise temperature of the studied mixer increased from 1100 to 3800 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1313
Permanent link to this record



	Author	Tretyakov, Ivan; Seliverstov, Sergey; Zolotov, Philipp; Kaurova, Natalya; Voronov, Boris; Finkel, Matvey; Goltsman, Gregory
	Title	Noise temperature and noise bandwidth of hot-electron bolometer mixer at 3.8 THz			Type	Abstract
	Year	2014	Publication	Proc. 25^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 25^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	77
	Keywords	NbN HEB mixer
	Abstract	We report on our recent results of double sideband (DSB) noise temperature and bandwidth measurements of quasi-optical hot electron bolometer (HEB) mixers at local oscillator frequency of 3.8 THz. The HEB mixers used in this work were made of a NbN thin film and had a superconducting transition temperature of about 10.3 K. To couple terahertz radiation, the NbN microbridge (0.2 μm long and 2 μm wide) was integrated with a planar logarithmic-spiral antenna. The mixer chip was glued to an elliptical Si lens clamped tightly to a mixer block mounted on the 4.2 K plate of a liquid helium cryostat. The terahertz radiation was fed into the HEB device through the cryostat window made of a 0.5 mm thick HDPE. A band-pass mesh filter was mounted on the 4.2 K plate to minimize the direct detection effect [1]. We used a gas discharge laser irradiating at 3.8 THz H 2 0 line as a local oscillator (LO). The LO power was combined with a black body broadband radiation via Mylar beam splitter. Our receiver allows heterodyne detection with an intermediate frequency (IF) of a several gigahertz which dictates usage of a wideband SiGe low noise amplifier [2]. The receiver IF output signal was further amplified at room temperature and fed into a square-law power detector through a band-pass filter. The DSB receiver noise temperature was measured using a conventional Y-factor technique at IF of 1.25 GHz and band of 40 MHz. Using wideband amplifiers at both cryogenic and room temperature stages we have estimated IF bandwidth of the HEB mixers used. The obtained results strengthen the position of the HEB mixer as one of the most important tools for submillimeter astronomy. This device operates well above the energy gap (at frequencies above 1 THz) where performance of state-of-the-art SIS mixers starts to degrade. So, HEB mixers are expected to be a device of choice in astrophysical observations (ground-, aircraft- and space-based) at THz frequencies due to its excellent noise performance and low LO power requirements. The HEB mixers will be in operation on Millimetron Space Observatory. References 1. J. J. A. Baselmans, A. Baryshev, S. F. Reker, M. Hajenius, J. R. Gao, T. M. Klapwijk, Yu. Vachtomin, S. Maslennikov, S. Antipov, B. Voronov, and G. Gol'tsman, Appl. Phys. Lett., 86, 163503 (2005). 2. Sander Weinreb, Life Fellow, IEEE, Joseph C. Bardin, Student Member, IEEE, and Hamdi Mani, “Design of Cryogenic SiGe Low-Noise Amplifiers”, IEEE Transactions on Microwave Theory and Techniques, 55, 11, 2007.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1362
Permanent link to this record



	Author	Kinev, N. V.; Filippenko, L. V.; Ozhegov, R. V.; Gorshkov, K. N.; Gol’tsman, G. N.; Koshelets, V. P.
	Title	Superconducting integrated receiver with HEB-mixer			Type	Abstract
	Year	2014	Publication	Proc. 25^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 25^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	78
	Keywords	NbN HEB mixer, SIR, superconducting integrated receiver
	Abstract	Detectors in THz range with high sensitivity are very essential nowadays in different fields: space technology, atmospheric research, medicine and security. The most sensitive heterodyne detectors below 1 THz are the SIS- mixers due to its extremely high non-linearity and low noise level. Nevertheless, their effective range is strongly limited by superconducting gap Δ (about 1 THz for NbN circuits). Above 1 THz the detectors based on HEB (hot electron bolometers) are more effective [1]; their operation frequency is not limited from above and can be up to 70 THz [2]. HEBs can perform as both direct and heterodyne detectors (mixers). All HEB-mixers are used with external heterodyne, most useful are synthesizer with multipliers, quantum cascade lasers or far infrared lasers and backward-wave oscillators. Superconducting integrated receiver (SIR) is based on implementation of both SIS-miser and flux flow oscillator (FFO) acting as heterodyne at single chip [3]. Such receiver has been successfully applied at TELIS balloon-borne instrument for study of atmospheric constituents [4] and looks as very promising device for other THz missions including space research. Thus, there is a task to expand its operating range to higher frequencies. The frequency range of the SIR the operation is limited by both the SIS-mixer and the FFO maximum frequencies. The idea of present work is implementation of the HEB as a mixer in the SIR instead of the SIS traditionally used. We introduce the first results of integrating the HEB-mixer coupled to planar slot antenna with the FFO on one chip. For properly FFO operation the SIS harmonic mixer is used to phase lock the oscillator. The scheme of the SIR based on the HEB- mixer is presented in fig. 1. We have demonstrated the principal possibility of integration of both the HEB-mixer and the flux-flow oscillator on a single chip and succeed with sufficient power coupling for properly receiver operation. We measured the direct response of the HEB coupled to the antenna at THz frequencies by the FTS setup and noise temperature of the receiver with standard Y- factor measuring technique. The SIR operating range 450-620 GHz was achieved with the best uncorrected noise temperature of about 1000 К. One should note that it is still quite low frequencies for effective operation of the HEB-mixer; therefore we expect to obtain the better results for frequencies above 700 GHz (up to 1.2 THz). Another additional task is to increase the FFO frequencies by using NbTiN electrodes instead of NbN; currently we are working on this issue. This work was supported by the RFBR grant, the Ministry of Education and Science of Russia and Russian Academy of Sciences. References 1. D. Semenov, H.-W. Hubers, J. Schubert, G. N. Gol’tsman, A. I. Elantiev, B. M. Voronov, E. M. Gershenzon, Design and performance of the lattice-cooled hot-electron terahertz mixer, J. Appl. Phys. 88, 6758, 2000. 2. Maslennikov S. N., Finkel M. I., Antipov S. V. et al. Spiral antenna coupled and directly coupled NbN HEB mixers in the frequency range from 1 to 70THz. Proc. 17 th international symposium on space terahertz technology. Paris, France: 2006.—may. Pp. 177 – 179. 3. V.P. Koshelets, S.V. Shitov. Integrated Superconducting Receivers. Supercond. Sci. Technol. Vol. 13. P. R53-R59. 2000. 4. Gert de Lange, Dick Boersma, Johannes Dercksen et.al. Development and Characterization of the Superconducting Integrated Receiver Channel of the TELIS Atmospheric Sounder. Supercond. Sci. Technol. vol. 23, No 4, 045016 (8pp). 2010.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1363
Permanent link to this record



	Author	Shcherbatenko, Michael; Lobanov, Yury; Finkel, Matvey; Maslennikov, Sergey; Pentin, Ivan; Semenov, Alexander; Titova, Nadezhda; Kaurova, Natalya; Voronov, Boris M.; Rodin, Alexander; Klapwijk, Teunis M.; Gol’tsman, Gregory N.
	Title	Development of a 30 THz heterodyne receiver based on a hot-electron-bolometer mixer			Type	Abstract
	Year	2014	Publication	Proc. 25^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 25^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	122
	Keywords	mid-IR NbN HEB mixers, GaAs substrates
	Abstract	We present new Hot-Electron-Bolometer (HEB) mixers designed for mid-IR spectroscopy targeting astrophysical and geophysical observations where high sensitivity and spectral resolution are required. The mixers are made of an ultrathin NbN film deposited on GaAs substrates. Two entirely different types of the devices have been fabricated. The first type is based on a direct radiation coupling concept and the mixing devices are shaped as squares of 5×5 μm 2 (which corresponds to the diffraction limit at the chosen wavelength) and 10×10 μm 2 (which was used to establish a possible influence of the contact pads on the radiation absorption). The second type utilizes a spiral antenna designed with HFSS. The fabrication and layout of the devices as well as the performance comparison will be presented. During the experiments, the HEB mixer was installed on the cold plate of a LHe cryostat. A germanium window and an extended semi-spherical germanium lens are used to couple the radiation. The cryostat is equipped with a germanium optical filter of thickness 0.5 mm and with a center wavelength of 10.6 mμ. The incident power absorption is measured by using the isothermal method. As a Local Oscillator, a 10.6 micrometers line of a CO2 gas laser is used. We further characterize the frequency response of the spiral antenna with a FIR-spectrometer. The noise characteristics of the mixers are determined from a room temperature cold load and a heated black body at ~600 K as a hot load.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1364
Permanent link to this record



	Author	Shurakov, Alexander; Tong, Cheuk-yu E.; Blundell, Raymond; Gol’tsman, Gregory
	Title	A microwave pumped HEB direct detector using a homodyne readout scheme			Type	Abstract
	Year	2014	Publication	Proc. 25^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 25^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	129
	Keywords	waveguide NbN HEB detector, NEP
	Abstract	We report the results of our study on the noise performance of a fast THz detector based on the repurpose of hot electron bolometer mixer (HEB). Instead of operating with an elevated bath temperature, microwave power is injected into the HEB device, which enhances the sensitivity of the detector and at the same time provide a mechanism for reading out impedance changes of the device induced by the modulated incident THz radiation [1]. We have demonstrated an improvement of the detector’s optical noise equivalent power (NEP). Furthermore, by introducing a homodyne readout scheme based on a room temperature microwave mixer, the dynamic range of the detector is increased. The HEB devices used in this work were made of 4 nm thick NbN film. The detector chips were installed into a waveguide mixer block fitted with a corrugated horn, mounted on the cold plate of a liquid helium cryostat. The HEBs were operated at a bath temperature of 4.2 K. The signal beam was terminated on black bodies at ambient and liquid nitrogen temperatures. A chopper wheel placed in front of the cryostat window operating at a frequency of 1.48 kHz modulated the input load temperature of the detector. A cold mesh filter, centered at 830 GHz, was used to define the input signal power bandwidth. Microwave was injected through a broadband directional coupler inside the cryostat. Our experiments were mostly conducted at a pump frequency of 1.5 GHz. The reflected microwave power from the HEB device was fed into a cryogenic low noise amplifier (LNA). The output of the LNA was connected to the RF input port of a room temperature microwave mixer, which beat the reflected signal from the HEB using a copy of the original 1.5 GHz injection signal in a homodyne demodulation scheme. The amplitude of the detected power was measured by a lock-in amplifier, which was synchronized to the chopper frequency. Preliminary results yield an optical NEP of ~1 pW/ Hz 1/2 which corresponds to an improvement of a factor of 3 compared to [1], driven mainly by a lowering of the system noise floor. The dynamic range was also increased by similar amount. References 1. A. Shurakov et al. “A Microwave Pumped Hot Electron Bolometric Direct Detector,” submitted on Oct 18, 2013 to Appl. Phys. Let.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1365
Permanent link to this record



	Author	Tong, C. Edward; Trifonov, Andrey; Blundell, Raymond; Shurakov, Alexander; Gol’tsman, Gregory
	Title	A digital terahertz power meter based on an NbN thin film			Type	Abstract
	Year	2014	Publication	Proc. 25^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 25^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	170
	Keywords	waveguide NbN HEB mixers
	Abstract	We have further studied the effect of subjecting a superconducting Hot Electron Bolometer (HEB) element made from an NbN thin film to microwave radiation. Since the photon energy is weak, the microwave radiation does not simply heat the film, but generates a bi-static state, switching between the superconducting and normal states, upon the application of a small voltage bias. Indeed, a relaxation oscillation of a few MHz has previously been reported in this regime [1]. Switching between the superconducting and normal states modulates the reflected microwave pump power from the device. A simple homodyne setup readily recovers the spontaneous switching waveform in the time domain. The switching frequency is a function of both the bias voltage (DC heating) and the applied microwave power. In this work, we use a 0.8 THz HEB waveguide mixer for the purpose of demonstration. The applied microwave pump, coupled through a directional coupler, is at 1 GHz. Since the pump power is of the order of a few μW, a room temperature amplifier is sufficient to amplify the reflected pump power from the HEB mixer, which beats with the microwave source in a homodyne set-up. After further amplification, the switching waveform is passed onto a frequency counter. The typical frequency of the switching pulses is 3-5 MHz. It is found that the digital frequency count increases with higher microwave pump power. When the HEB mixer is subjected to additional optical power at 0.8 THz, the frequency count also increases. When we vary the incident optical power by using a wire grid attenuator, a linear relationship is observed between the frequency count and the applied optical power, over at least an order of magnitude of power. This phenomenon can be exploited to develop a digital power meter, using a very simple electronics setup. Further experiments are under way to determine the range of linearity and the accuracy of calibration transfer from the microwave to the THz regime. References 1. Y. Zhuang, and S. Yngvesson, “Detection and interpretation of bistatic effects in NbN HEB devices,” Proc. 13 th Int. Symp. Space THz Tech., 2002, pp. 463–472.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1366
Permanent link to this record



	Author	Pentin, I. V.; Smirnov, A. V.; Ryabchun, S. A.; Gol’tsman, G. N.; Vaks, V. L.; Pripolzin, S. I.; Paveliev, D. G.
	Title	Heterodyne source of THz range based on semiconductor superlattice multiplier			Type	Conference Article
	Year	2011	Publication	IRMMW-THz	Abbreviated Journal	IRMMW-THz
	Volume		Issue		Pages	1-2
	Keywords	NbN HEB mixer, superlattice
	Abstract	We present the results of our studies of the possibility of developing a heterodyne receiver incorporating a hot-electron bolometer mixer as the detector and a semiconductor superlattice multiplier driven by a reference synthesizer as the local oscillator. We observe that such a local oscillator offers enough power in the terahertz range to pump the HEB into the operating state.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number	6105209			Serial	1384
Permanent link to this record



	Author	Maslennikova, A.; Larionov, P.; Ryabchun, S.; Smirnov, A.; Pentin, I.; Vakhtomin, Yu.; Smirnov, K.; Kaurova, N.; Voronov, B.; Goltsman, G.
	Title	Noise equivalent power and dynamic range of NBN hot-electron bolometers			Type	Conference Article
	Year	2011	Publication	Proc. MLPLIT	Abbreviated Journal	Proc. MLPLIT
	Volume		Issue		Pages	146-148
	Keywords	NbN HEB
	Abstract
	Address	Suzdal / Vladimir (Russia)
	Corporate Author				Thesis
	Publisher	Modern laser physics and laser-information technologies for science and manufacture	Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference	1st international russian-chinese conference / youthschool-workshop
	Notes	September 23-28, 2011			Approved	no
	Call Number				Serial	1386
Permanent link to this record



	Author	Goltsman, G.
	Title	Superconducting NbN hot-electron bolometer mixer, direct detector and single-photon counter: from devices to systems			Type	Report
	Year	2009	Publication	2-nd Int. Conf. EUROFLUX	Abbreviated Journal	2-nd Int. Conf. EUROFLUX
	Volume		Issue		Pages
	Keywords	HEB, SSPD, SNSPD
	Abstract
	Address	Avignon, France
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes	Provided by the SAO/NASA Astrophysics Data System			Approved	no
	Call Number				Serial	1398
Permanent link to this record



	Author	Cherednichenko, S.; Drakinskiy, V.; Lecomte, B.; Dauplay, F.; Krieg, J.-M.; Delorme, Y.; Feret, A.; Hübers, H.-W.; Semenov, A.D.; Gol’tsman, G.N.
	Title	Terahertz heterodyne array based on NbN HEB mixers			Type	Abstract
	Year	2008	Publication	Proc. 19^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal
	Volume		Issue		Pages	43
	Keywords	NbN HEB mixers array
	Abstract	A 16 pixel heterodyne receiver for 2.5 THz is been developed based on NbN superconducting hot-electron bolometer (HEB) mixers. The receiver uses a quasioptical RF coupling approach where HEB mixers are integrated into double dipole antennas on 1.5μm thick Si3N4 / SiO2 membranes. Miniature mirrors (one per pixel) and back short for the antenna were used to design the output mixer beam profile. The camera design allows all 16 pixel IF readout in parallel. The gain bandwidth of the HEB mixers on Si3N4 / SiO 2 membranes was found to be about 3 GHz, when an MgO buffer layers is applied on the membrane. We will also present the progress in the camera heterodyne tests.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1411
Permanent link to this record



	Author	Cherednichenko, S.; Drakinskiy, V.; Baubert, J.; Lecomte, B.; Dauplay, F.; Krieg, J.-M.; Delorme, Y.; Feret, A.; Hübers, H.-W.; Semenov, A. D.; Gol’tsman, G. N.
	Title	2.5 THz multipixel heterodyne receiver based on NbN HEB mixers			Type	Abstract
	Year	2007	Publication	Proc. 18^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 18^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	112
	Keywords	NbN HEB mixers
	Abstract	A 16 pixel heterodyne receiver for 2.5 THz has been developed based on NbN superconducting hot-electron bolometer (HEB) mixers. The receiver uses a quasioptical RF coupling approach where HEB mixers are integrated into double dipole antennas on 1.5μm thick Si3N4 / SiO2 membranes. Spherical mirrors (one per pixel) and backshort distance from the antenna have been used to design the output mixer beam profile. The camera design allows all 16 pixel IF readout in parallel. Measurements of the mixers sensitivity and the input RF band are presented, and compared against calculations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1419
Permanent link to this record



	Author	Semenov, A.; Richter, H.; Smirnov, A.; Günther, B.; Hübers, H.-W.; Il’in, K.; Siegel, M.; Gol’tsman, G.; Drakinskiy, V.; Merkel, H.; Karamarkovic, J.
	Title	Development of HEB mixers for GREAT and for security screening			Type	Abstract
	Year	2007	Publication	Proc. 18^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 18^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	184
	Keywords	NbN HEB mixers, GREAT
	Abstract	We report the study on the quasioptical coupling efficiency and the gain bandwidth of NbN hot-electron bolometer mixers developed for the 4.7 THz channel of the German receiver for Astronomy at THz-frequencies (GREAT) and for security screening at subterahertz frequencies. Radiation coupling efficiency and directive properties of integrated lens antennas with log-spiral, log-periodic and double-slot planar feeds coupled to a hot-electron bolometer were experimentally studied at frequencies from 1 THz to 6 THz and compared with simulations based on the method of moments and the physical-optics ray tracing. For all studied antennas the modeled spectral dependence of the coupling efficiency fits to the experimental data obtained with both Fourier transform spectroscopy and noise temperature measurements only if the complex impedance of the bolometer is explicitly taken into account. Our experimental data did not indicate any noticeable contribution of the quantum noise to the system noise temperature. The experimentally observed deviation of the beam pattern from the model prediction increases with frequency and is most likely due to a non- ideality of the presently used lenses. Study of the intermediate frequency mixer gain at local oscillator (LO) frequencies between 2.5 THz and 0.3 THz showed an increase of the gain bandwidth at low LO frequencies that was understood as the contribution of the direct interaction of magnetic vortices with the radiation field. We have found that the non- homogeneous hot-spot model more adequately describes variation of the intermediate frequency bandwidth with the applied local oscillator power than any of uniform mixer models. The state-of-the-day performance of the GREAT 4.7-THz channel and the 0.8-THz security scanner will be presented.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1420
Permanent link to this record



	Author	Ryabchun, Sergey; Tong, Cheuk-yu Edward; Blundell, Raymond; Kimberk, Robert; Gol’tsman, Gregory
	Title	Stabilisation of a terahertz hot-electron bolometer mixer with microwave feedback control			Type	Conference Article
	Year	2007	Publication	Proc. 18^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 18^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	193-198
	Keywords	waveguide NbN HEB mixers, Allan variance, stability
	Abstract	We report on implementation of microwave feedback control loop to stabilise the performance of an HEB mixer receiver. It is shown that the receiver sensitivity increases by a factor of 4 over a 16-minute scan, and the corresponding Allan time increases up to 10 seconds, as opposed to an open loop value of 1 second. Our experiments also demonstrate that the receiver sensitivity is limited by the intermediate frequency chain.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1421
Permanent link to this record



	Author	Jiang, Ling; Miao, Wei; Zhang, Wen; Li, Ning; Lin, Zhen Hui; Yao, Qi Jun; Shi, Sheng-Cai; Svechnikov, Sergey I.; Vakhtomin, Yury B.; Antipov, Sergey V.; Voronov, Boris M.; Kaurova, Natalia S.; Gol'tsman, Gregory N.
	Title	Characterization of quasi-optical NbN phonon-cooled superconducting HEB mixers			Type	Conference Article
	Year	2006	Publication	Proc. 17^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 17^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	55-58
	Keywords	NbN HEB mixers
	Abstract	In this paper, we thoroughly investigate the performance of quasi-optical NbN phonon-cooled superconducting hot-electron bolometer (HEB) mixers, cryogenically cooled by a close-cycled 4-K refrigerator at 500 GI-1z and 850 GHz. The uncorrected lowest receiver noise Abstract---In temperatures measured are 800 K at 500 CHz without anti-reflection coating, and 1000 K @ 850 GHz with a 50 11M thick Mylar anti-reflection coating. The dependence of receiver noise temperature on the critical current and bath temperature of HEB mixer is also investigated here. Lifetime of quasi-optical superconducting NbN HEB mixers of different volumes, room temperature resistances, and critical temperatures are thoroughly studied. Increased room temperature resistance with time over the initial resistance changes between 1 and 1.2, and the reduced critical current with time over the initial value fluctuates slightly around 0.7 for most HEB mixers even of different volumes, room temperature resistances, and critical temperatures. The critical current degrades sharply vvhile room temperature resistance varies over 1.25.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1435
Permanent link to this record



	Author	Gao, J.R.; Hiajenius, M.; Yang, Z.Q.; Klapwijk, T.M.; Miao, W.; Shi, S. C.; Voronov, B.; Gortsman, G.
	Title	Direct comparison of the sensitivity of a spiral and a twin-slot antenna coupled HEB mixer at 1.6 THz			Type	Conference Article
	Year	2006	Publication	Proc. 17^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 17^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	59-62
	Keywords	NbN HEB mixers
	Abstract	To make a direct comparison of the sensitivity between a spiral and a twin slot antenna coupled HEB mixer, we designed both types of mixers and fabricated them in a single processing run and on the same wafer. Both mixers have similar dimensions of NbN bridges (1.5-2 pm x0.2 pm). At 1.6 THz we obtained a nearly identical receiver noise temperature from both mixers (only 5% difference), which is in a good agreement with the simulation based on semi analytical models for both antennas. In addition, by using a bandpass filter to reduce the direct detection effect and lowering the bath temperature to 2.4 K, we measured the lowest receiver noise temperature of 700 K at 1.63 THz using the twin-slot antenna mixer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1436
Permanent link to this record



	Author	Baselmans, J. J. A.; Baryshev, A.; Hajenius, M.; Gao, J. R.; Klapwijk, T. M.; Voronov, B.; Gol'tsman, G.
	Title	Influence of the direct response on the heterodyne sensitivity of hot electron bolometer mixers			Type	Abstract
	Year	2006	Publication	Proc. 17^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 17^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	81
	Keywords	NbN HEB mixers
	Abstract	We present a detailed experimental study of the direct detection effect in a small volume (0.15pm x lpm) NbN hot electron bolometer mixer. It is a quasioptical mixer with a twin slot antenna designed for 700 GHz and the measurement was done at a LO frequency of 670 GHz. The direct detection effect is characterized by a change in the mixer bias current when switching broadband radiation from a 300 K hot load to a 77 K cold load in a standard Y factor measurement. The result is, depending on the receiver under study, an increase or decrease in the receiver noise temperature. We find that the small signal noise temperature, which is the noise temperature that would be observed without the presence of the direct detection effect, and thus the one that is relevant for an astronomical observation, is 20% lower than the noise temperature obtained using 300 K and 77 K calibration loads. Thus, in our case the direct detection effect reduces the mixer sensitivity. These results are in good agreement with previous measurement at THz frequencies [1]. Other experiments report an increase in mixer sensitivity [2]. To analyze this discrepancy we have designed a separate set of experiments to find out the physical origin of the direct detection effect. Possible candidates are the bias current dependence of the mixer gain and the bias current dependence of the IF match. We measured directly the change in mixer IF match and receiver gain due to the direct detection effect. From these measurements we conclude that the direct detection effect is caused by a combination of bias current reduction when switching form the 77 K to the 300 K load in combination with the bias current dependence of the receiver gain. The bias current dependence of the receiver gain is shown to be mainly caused by the current dependence of the mixer gain. We also find that an increase in receiver sensitivity due to the direct detection effect is only possible if the noise temperature change due to the direct detection is dominated by the mixer-amplifier IF match. [1] J.J.A. Baselmans, A. Baryshev, S.F. Reker, M. Hajenius, J.R. Gao, T.M. Klapwijk, Yu.Vachtomin, S. Maslennikov, S. Antipov, B. Voronov, and G. Gol'tsman., Appl. Phys. Lett. 86, 163503 (2005). [2] S. Svechnokov, A. Verevkin, B. Voronov, E. Menschikov. E. Gershenzon, G. Gol'tsman, 9th Int. Symp. On Space THz. Techn., 45, (1999).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1437
Permanent link to this record



	Author	Gao, J. R.; Hajenius, M.; Tichelaar, F. D.; Voronov, B.; Grishina, E.; Klapwijk, T. M.; Gol'tsman, G.; Zorman, C. A.
	Title	Can NbN films on 3C-SiC/Si change the IF bandwidth of hot electron bolometer mixers?			Type	Conference Article
	Year	2006	Publication	Proc. 17^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 17^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	187-189
	Keywords	NbN HEB mixers
	Abstract	We realized ultra thin NbN films sputtered grown on a 3C-SiC/Si substrate. The film with a thickness of 3.5-4.5 nm shows a 1', of 11.8 K, which is the highest I`, observed among ultra thin NbN films on different substrates. The high-resolution transmission electron microscopy (HRTEM) studies show that the film has a monocrystalline structure, confirming the epitaxial growth on the 3C-SiC. Based on a two-temperature model and input parameters from standard NbN films on Si, simulations predict that the new film can increase the IF bandwidth of a HEB mixer by about a factor of 2 in comparison to the standard films. In addition, we find standard NbN films on Si with a T c of 9.4 K have a thickness of around 5.5 nm, being thicker than expected (3.5 nm).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1439
Permanent link to this record



	Author	Zhang, W.; Jiang, L.; Lin, Z. H.; Yao, Q. J.; Li, J.; Shi, S. C.; Svechnikov, S. I.; Vachtomin, Yu. B.; Antipov, S. V.; Voronov, B. M.; Kaurova, N. S.; Gol'tsman, G. N.
	Title	Development of a quasi-optical NbN superconducting HEB mixer			Type	Conference Article
	Year	2005	Publication	Proc. 16^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 16^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	209-213
	Keywords	NbN HEB mixers
	Abstract	In this paper, we report the performance of a quasi-optical NbN superconducting HEB (hot electron bolometer) mixer measured at 500 and 850GHz. The quasi-optical NbN superconducting HEB mixer is cryogenically cooled by a 4-K close-cycled refrigerator. Measured receiver noise temperature at 850 and 500GHz are 3000K and 2500K respectively with wire grid as beamsplitter, while the lowest receiver noise temperature is found to be approximately 1200K with Mylar film. The theoretical receiver noise temperature (taking into account the elliptical polarization of log-spiral antenna) is consistent with measured one. The receiver noise temperature and conversion gain with 15-μm Mylar film as the beamsplitter at 500GHz are thoroughly investigated for different LO pumping levels and dc biases. The stability of the mixer’s IF output power is also demonstrated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1470
Permanent link to this record



	Author	Yang, Z. Q.; Hajenius, M.; Baselmans, J. J. A.; Gao, J.R.; Klapwijk, T. M.; Voronov, B.; Gol’tsman, G.
	Title	Improved sensitivity of NbN hot electron bolometer mixers by vacuum baking			Type	Conference Article
	Year	2005	Publication	Proc. 16^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 16^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	222-225
	Keywords	NbN HEB mixer
	Abstract	We find that the sensitivity of heterodyne receivers based on superconducting hot-electron bolometer (HEB) in- creases by 25 − 30% after baking at 85 o C and in a high vacuum. The devices studied are twin-slot antenna coupled HEB mixers with a small NbN bridge of 1×0.15 μm 2 . The mixer noise temperature, gain, and resistance versus temperature curve of a HEB before and after baking are compared and analyzed. We show that baking reduces the intrinsic noise of the mixer by 37 % and makes the superconducting transition of the bridge and the contacts sharper. We argue that the reduction of the noise is due to the improvement of the transparency of the contact/film interface. The lowest receiver noise temperature of 700 K is measured at a local oscillator frequency of 1.63 THz and a bath temperature of 4.3 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1471
Permanent link to this record



	Author	Loudkov, D.; Tong, C.-Y.E.; Blundell, R.; Kaurova, N.; Grishina, E.; Voronov, B.; Gol’tsman, G.
	Title	An investigation of the performance of the waveguide superconducting HEB mixer at different RF embedding impedances			Type	Conference Article
	Year	2005	Publication	Proc. 16^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 16^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	226-229
	Keywords	waveguide NbN HEB mixers
	Abstract	We have conducted an investigation of the performance of superconducting hot-electron bolometric (HEB) mixer at 800 GHz as a function of the embedding impedance of the waveguide embedding circuit. Using a single half-height mixer block, we have developed three different mixer chip configurations, offering nominal embedding resistances of 70, 35, and 15 Ohms. Both the High Frequency Structure Simulator (HFSS) software and scaled model impedance measurements were employed in the design process. Two batches of HEB mixers were fabricated to these designs using 3-4 nm thick NbN thin film. The mixers were characterized through receiver noise temperature measurements and Fourier Transform Spectrometer (FTS) scans. Briefly, a minimum receiver noise temperature of 440 K was measured at a local oscillator frequency 850 GHz for a mixer of normal state resistance 62 Ohms incorporated into a circuit offering a nominal embedding impedance of 70 Ohms. We conclude from our data that, for low noise operation, the normal state resistance of the HEB mixer element should be close to that of the embedding impedance of the mixer mount.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1472
Permanent link to this record



	Author	Edward Tong, C.-Y.; Loudkov, Denis N.; Paine, Scott N.; Marrone, Dan P.; Blundell, Raymond
	Title	Vector measurement of the beam pattern of a 1.5 THz superconducting HEB receiver			Type	Conference Article
	Year	2005	Publication	Proc. 16^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 16^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	453-456
	Keywords	NbTiN HEB mixers
	Abstract	Near-field vector beam pattern of the 1.5 THz superconducting Hot Electron Bolometer (HEB) receiver currently in operation in Northern Chile has been performed in our laboratory. Using an open waveguide probe, we have mapped both the amplitude and phase of the beam emerging from our 1.5 THz HEB receiver package, across a number of planes along the line of propagation of the radio-beam. With an integration time of about 100 ms per point, a signal-to-noise ratio of about 25 dB was achieved for a beam waist of 3.5 mm. These measurements have proved to be invaluable in achieving good alignment between the cryostat housing the HEB mixer and the remainder of the receiver and telescope optics. The accuracy of our beam measurement is estimated to be ±0.2 mm in position and ±5 arc minutes in angular displacement.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1474
Permanent link to this record



	Author	Baryshev, A.; Baselmans, J. J. A.; Reker, S. F.; Hajenius, M.; Gao, J. R.; Klapwijk, T. M.; Vachtomin, Yu.; Maslennikov, S.; Antipov, S.; Voronov, B.; Gol'tsman, G.
	Title	Direct detection effect in hot electron bolometer mixers			Type	Abstract
	Year	2005	Publication	Proc. 16^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 16^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	463-464
	Keywords	NbN HEB mixers, effect of direct detection, direct detection effect
	Abstract	NbN phonon cooled hot electron bolometer (HEB) mixers are currently the most sensitive heterodyne detectors at frequencies above 1.2 THz. They combine a good sensitivity (8-15 times the quantum limit), an IF bandwidth of the order of 4-6 GHz and a wide RF bandwidth from 0.7-5.2 THz. However, for use in a space based observatory, such as Herschel, it is of vital importance that the Local Oscillator (LO) power requirement of the mixer is compatible with the low output power of present day THz LO sources. This can be achieved by reducing the mixer volume and critical current. However, the large RF bandwidth and low LO power requirement of such a mixer result in a direct detection effect, characterized by a change in the bias current of the HEB when changing the RF signal from a black body load at 300 K to one at 77 K. As a result the measured sensitivity using a 300 K and 77 K calibration load differs significantly from the small signal sensitivity relevant for astronomical observations. In this article we describe a set of dedicated experiments to characterize the direct detection effect for a small volume quasi-optical NbN phonon cooled HEB mixer. We measure the direct detection effect in a small volume (0.15 μm · 1 μm · 3.5 nm) quasi- optical NbN phonon cooled HEB mixer at 1.6 THz. We found that the small signal sensitivity of the receiver is underestimated by approximately 35% due to the direct detection effect and that the optimal operating point is shifted to higher bias voltages when using calibration loads of 300 K and 77 K. Using a 200 GHz wide band-pass filter at the 4.2 K the direct detection effect virtually disappears. Heterodyne response measurements using water vapor absorption line in a gas cell confirms the existence and a magnitude of a direct detection effect. We also propose a theoretical explanation using uniform electron heating model. This direct detection effect has important implications for the calibration procedure of these receivers in real telescope systems. We are developing Nb HEBs for a large-format, diffusion-cooled hot electron bolometer (HEB) array submillimeter camera. The goal is to produce a 64 pixel array together with the University of Arizona to be used on the HHT on Mt Graham. It is designed to detect in the 850 GHz atmospheric window. We have fabricated Nb HEBs using a new angle- deposition process, which had previously produced high quality Nb-Au bilayer HEB devices at Yale. [1] We have characterized these devices using heterodyne mixing at ~30 GHz to compare to 345 GHz tests at the University of Arizona. We can also directly compare our Nb HEB mixers to SIS mixers in this same 345 GHz system. This allows us to rigorously calibrate the system’s losses and extract the mixer noise temperature in a well characterized mixer block, before undertaking the 850 GHz system. Here we give a report on the initial devices we have fabricated and characterized. * Department of Applied Physics, Yale University ** Department of Astronomy, University of Arizona [1] Applied Physics Letters 84, Number 8; p.1404-7, Feb 23 (2004)
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1475
Permanent link to this record



	Author	Cherednichenko, S.; Khosropanah, P.; Berg, T.; Merkel, H.; Kollberg, E.; Drakinskiy, V.; Voronov, B.; Gol’tsman, G.
	Title	Optimization of HEB mixer for the Herschel Space Observatory			Type	Abstract
	Year	2004	Publication	Proc. 15^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 15^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	16
	Keywords	NbN HEB mixers, applications
	Abstract	A mixer development for the HIFI instrument of the Herschel Space Observatory has come to the final stage. In our paper and conference presentation we will describe the most important details of the Band 6 Low and High Mixer Unit design. Special attention will be given to the optimization of the hot- electron bolometer mixer chip, which is based on 3.5nm NbN superconducting film on silicon. As the HEB’s local oscillator power requirements depend on the bolometer size, we have compared mixer noise temperature for different bolometer width- to- length ratio. A trade- off between mixer performance and local oscillator power requirements results in the mixer units equipped with optimized mixer chips, providing the largest coverage of the Band6 RF band with the lowest possible receiver noise. A short account of the beam pattern measurements of Band6 mixers will be given as well.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1490
Permanent link to this record



	Author	Baselmans, J. J. A.; Hajenius, M.; Gao, J. R.; Baryshev, A.; Kooi, J.; Klapwijk, T. M.; de Korte, P. A. J.; Voronov, B.; Gol’tsman, G.
	Title	Hot electron bolometer mixers with improved interfaces: sensitivity, LO power and stability			Type	Conference Article
	Year	2004	Publication	Proc. 15^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 15^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	17-24
	Keywords	NbN HEB mixers
	Abstract	We study twin slot antenna coupled NbN hot electron bolometer mixers with an improved contact structure and a small volume, ranging from 1 µm × 0.1 µm to 2 × 0.3 µm. We obtain a DSB receiver noise temperature of 900 K at 1.6 THz and 940 K at 1.9 THz. To explore the practical usability of such small HEB mixers we evaluate the LO power requirement, the sensitivity and the stability. We find that the LO power requirement of the smallest mixers is reduced to about 240 nW at the Si lens of the mixer. This value is larger than expected from the isothermal technique and the known losses in the lens by a factor of 3-3.5. The stability of these receivers is characterized using a measurement of the Allan Variance. We find an Allan time of 0.5 sec. in an 80 MHz bandwidth. A small increase in stability can be reached by using a higher bias at the expense of a significant amount of sensitivity. The stability is sufficient for spectroscopic applications in a 1 MHz bandwidth at a 1 Hz chopping frequency.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1491
Permanent link to this record



	Author	Semenov, Alexei D.; Hübers, Heinz-Wilhelm; Richter, Heiko; Smirnov, Konstantin; Gol'tsman, Gregory N.; Voronov, Boris M.
	Title	Superconducting hot-electron bolometer mixer for terahertz heterodyne receivers			Type	Abstract
	Year	2004	Publication	Proc. 15^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 15^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	164
	Keywords	NbN HEB mixers
	Abstract	A number of on-going astronomical and atmospheric research programs are aimed to the Terahertz (THz) spectral region. At frequencies above about 1.4 THz heterodyne receivers planned for these missions will use superconducting hot-electron bolometers as a mixers. We present current results on the development of superconducting NbN hot- electron bolometer mixer and quasioptical radiation coupling scheme for GREAT (German Receiver for Astronomy at Terahertz Frequencies, to be used aboard of SOFIA) and TELIS (Terahertz Limb Sounder). The mixer is incorporated into hybrid antenna consisting of a planar feed antenna, which has either logarithmic spiral or double-slot configuration, and hyperhemispherical silicon lens. For the log-spiral feed antenna, the double side-band receiver noise temperature of 5500 K was achieved at 4.3 THz. The noise temperature shows less than 3 dB increase in the intermediate frequency band from 4 GHz to 7 GHz. The hybrid antenna had almost frequency independent and symmetric radiation pattern with the beam-width slightly broader than expected for a diffraction limited pattern. Results of FTS measurements in the direct detection regime agreed with the spectral dependence of the noise temperature for spiral antennas with different spacing of inner terminals.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1492
Permanent link to this record



	Author	Hajenius, M.; Baselmans, J. J. A.; Gao, J. R.; Klapwijk, T. M.; de Korte 2, P. A. J.; Voronov, B.; Gol’tsman, G.
	Title	Increased bandwidth of NbN phonon cooled hot electron bolometer mixers			Type	Conference Article
	Year	2004	Publication	Proc. 15^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 15^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	381-386
	Keywords	NbN HEB mixers, IF bandwidth
	Abstract	We study experimentally the IF gain bandwidth of NbN phonon-cooled hot-electron-bolometer (HEB) mixers for a set of devices with different contact structures but an identical NbN film. We observe that the IF bandwidth depends strongly on the exact contact structure and find an IF gain bandwidth of 6 GHz for a device with an additional superconducting layer (NbTiN) in between the active NbN film and the gold contact to the antenna. These results contradict the common opinion that the IF bandwidth is determined by the phonon-escape time between the NbN film and the substrate. Hence we calculate the IF gain bandwidth of a superconducting film using a two-temperature model. We find that the bandwidth increases strongly with operating temperature and is not limited by the phonon escape time. This is because of strong temperature dependence of the phonon specific heat in the NbN film.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1494
Permanent link to this record



	Author	Gao, J. R.; Hajenius, M.; Baselmans, J. J. A.; Klapwijk, T. M.; de Korte, P. A. J.; Voronov, B.; Gol'tsman, G.
	Title	NbN hot electron bolometer mixers with superior performance for space applications			Type	Conference Article
	Year	2004	Publication	Proc. Int. workshop on low temp. electronics	Abbreviated Journal	Proc. Int. workshop on low temp. electronics
	Volume		Issue		Pages	11-17
	Keywords	NbN HEB mixers, applications
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Noordwijk	Editor	Armandillo, E.; Leone, B.
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference	International workshop on low temperature electronics- WOLTE 6 - Noordwijk
	Notes				Approved	no
	Call Number				Serial	1496
Permanent link to this record



	Author	Baselmans, J. J. A.; Hajenius, M.; Gao, J. R.; Klapwijk, T. M.; de Korte, P. A. J.; Voronov, B.; Gol'tsman, G.
	Title	Noise performance of NbN hot electron bolometer mixers at 2.5 THz and its dependence on the contact resistance			Type	Conference Article
	Year	2003	Publication	Proc. 14^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 14^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	11-19
	Keywords	NbN HEB mixers
	Abstract	NbN hot electron bolometer mixers (HEBM) are at this moment the best heterodyne receivers for frequencies above 1 Thz. However, the fabrication procedure of these devices is such that the quality of the interface between the NbN superconducting film and the contact structure is not under good control. The result is a low transparency interface between the bolometer itself and the contact/antenna structure. In this paper we report a detailed experimental study on a novel idea to increase the transparency of this interface. This leads to a record sensitivity and more reproducible performance. We compare identical bolometers, coupled with a spiral antenna, with different NbN bolometer-contact pad interfaces. We find that cleaning the NbN interface alone results in an increase in the noise temperature. However, cleaning the NbN interface and adding a thin additional superconductor prior to the gold contact deposition improves the noise temperature of the HEBm with more than a factor of 2. A device with a contact pad on top of an in-situ cleaned NbN film consisting of 10 nm of NbTiN and 40 nm of gold has a DSB noise temperature of 1050 K at 2.5 THz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1497
Permanent link to this record



	Author	Semenov, Alexei D.; Hiibers, Heinz-Wilhelm; Richter, Heiko; Smirnov, Konstantin; Gol'tsman, Gregory N.; Kaurova, Natalia; Voronov, Boris M.
	Title	Superconducting hot-electron bolometer mixer for terahertz heterodyne receivers			Type	Conference Article
	Year	2003	Publication	Proc. 14^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 14^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	33-40
	Keywords	NbN HEB mixers
	Abstract	A number of on-going astronomical and atmospheric research programs are aimed to the Terahertz (THz) spectral region. At frequencies above about 1.4 THz heterodyne receivers planned for these missions will use superconducting hot-electron bolometers as a mixers. We present recent results of the terahertz antenna development of superconducting NbN hot-electron bolometer mixer for GREAT (German Receiver for Astronomy at Terahertz Frequencies, to be used aboard of SOFIA) and TELIS (Terahertz Limb Sounder). The mixer is incorporated into hybrid antenna consisting of a planar feed antenna, which has either logarithmic spiral or double-slot configuration, and hyper hemispherical silicon lens. The hybrid antenna showed almost frequency independent and symmetric radiation pattern with the beam-width slightly broader than expected for diffraction limited antenna. The noise temperature as well as its spectral dependence changes with the bolometer sizes that provides additional tool for mixer optimization. FTS spectra measured in the direct detection regime agreed with the noise temperature spectra.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1498
Permanent link to this record



	Author	Tong, C.-Y. Edward; Meledin, Denis; Blundell, Raymond; Erickson, Neal; Kawamura, Jonathan; Mehdi, Imran; Gol'tsman, Gregory
	Title	A 1.5 THz hot-electron bolometer mixer operated by a planar diode-based local oscillator			Type	Abstract
	Year	2003	Publication	Proc. 14^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 14^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	286
	Keywords	waveguide NbN HEB mixers
	Abstract	We describe a 1.5 THz heterodyne receiver based on a superconductin g hot-electron bolometer mixer, which is pumped by an all-solid-state local oscillator chain. The bolometer is fabricated from a 3.5 nm-thick niobium nitride film deposited on a quartz substrate with a 200 nm-thick magnesium oxide buffer layer. The bolometer measures 0.15 fun in width and 1.5 1..tm in length. The chip consisting of the bolometer and mixer circuitry is incorporated in a fixed-tuned waveguide mixer block with a corru g ated feed horn. The local oscillator unit comprises of a cascade of four planar doublers followin g a MMIC-based W-band power amplifier. The local oscillator is coupled to the mixer using a Martin-Puplett interferometer. The local oscillator output power needed for optimal receiver performance is approximately 1 to 2 11W, and the chain is able to provide this power at a number of frequency points between 1.45 and 1.56 THz. By terminating the rf input with room temperature and 77 K loads, a Y-factor of 1.11 (DSB) has been measured at a local oscillator frequency of 1.476 THz at 3 GHz intermediate frequency.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1501
Permanent link to this record



	Author	Smirnov, K. V.; Vachtomin, Yu. B.; Antipov, S. V.; Maslennikov, S. N.; Kaurova, N. S.; Drakinsky, V. N.; Voronov, B. M.; Gol'tsman, G. N.; Semenov, A. D.; Richter, H.; Hubers, H.-W.
	Title	Noise and gain performance of spiral antenna coupled HEB mixers at 0.7 THz and 2.5 THz			Type	Conference Article
	Year	2003	Publication	Proc. 14^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 14^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	405-412
	Keywords	NbN HEB mixers
	Abstract	Noise and gain performance of hot electron bolometer (HEB) mixers based on ultrathin superconducting NbN films integrated with a spiral antenna was studied. The noise temperature measurements for two samples with different active area of 3 p.m x 0.24 .tni and 1.3 1..tm x 0.12 1.tm were performed at frequencies 0.7 THz and 2.5 THz. The best receiver noise temperatures 370 K and 1600 K, respectively, have been found at these frequencies. The influence of contact resistance between the superconductor and the antenna terminals on the noise temperature of HEB is discussed. The noise and gain bandwidth of 5GHz and 4.2 GHz, respectively, are demonstrated for similar HEB mixer at 0.75 THz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1502
Permanent link to this record



	Author	Richter, H.; Semenov, A.; Hubers, H.-W.; Smirnov, K.; Gol’tsman, G.; Voronov, B.
	Title	Phonon cooled hot-electron bolometric mixer for 1-5 THz			Type	Conference Article
	Year	2004	Publication	Proc. 29th IRMMW / 12th THz	Abbreviated Journal	Proc. 29th IRMMW / 12th THz
	Volume		Issue		Pages	241-242
	Keywords	NbN HEB mixers
	Abstract	Heterodyne receivers for applications in astronomy and planetary research need quantum limited sensitivity. In instruments which are currently built for SOFIA and Herschel, superconducting hot electron bolometers (HEB) are used to achieve this goal at frequencies above 1.4 THz. In order to optimize the performance for this frequency of hot electron bolometer mixers with different in-plane dimensions and logarithmic-spiral feed antennas have been investigated. Their noise temperatures and beam patterns were measured. Above 3 THz the best performance was achieved with a superconducting bridge of 2.0/spl times/0.2 /spl mu/m/sup 2/ incorporated in a logarithmic spiral antenna. The DSB noise temperatures were 2700 K, 4700 and 6400 K at 3.1 THz, 4.3 THz and 5.2 THz, respectively. The results demonstrate that the NbN HEB is very well suited as a mixer for THz heterodyne receivers up to at least 5 THz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1506
Permanent link to this record



	Author	Hübers, Heinz-Wilhelm; Semenov, A.; Richter, H.; Smirnov, K.; Gol'tsman, G.; Voronov, B.
	Title	Phonon cooled far-infrared hot electron bolometer mixer			Type	Abstract
	Year	2002	Publication	NASA/ADS	Abbreviated Journal	NASA/ADS
	Volume		Issue		Pages
	Keywords	NbN HEB mixers
	Abstract	Heterodyne receivers for applications in astronomy need quantum-limited sensitivity. At frequencies above 1.4 THz superconducting hot electron bolometers (HEB) can be used to achieve this goal. We present results of the development of a quasi-optical phonon-cooled NbN HEB mixer for GREAT, the German heterodyne receiver for SOFIA. Different mixers with logarithmic spiral and double slot feed antennas have been investigated with respect to their noise temperature, conversion loss, linearity and beam pattern at several frequencies between 0.7 THz and 5.2 THz. At 2.5 THz a double sideband noise temperature of 2200 K was achieved. The conversion loss was 16 dB. The response of the mixer was linear up to 400 K load temperature. This performance was verified by measuring an emission line of methanol at 2.5 THz. The results demonstrate that the NbN HEB is very well suited as a mixer for FIR heterodyne receivers.
	Address	Monterey, CA
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference	Far-IR, Sub-mm & MM Detector Technology Workshop, 1-3 April 2002
	Notes	id.37			Approved	no
	Call Number				Serial	1534
Permanent link to this record



	Author	Loudkov, D.; Khosropanah, P.; Cherednichenko, S.; Adam, A.; MerkeI, H.; Kollberg, E.; Gol'tsman, G.
	Title	Broadband fourier transform spectrometer (FTS) measurements of spiral and double-slot planar antennas at THz frequencies			Type	Conference Article
	Year	2002	Publication	Proc. 13^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 13^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	373-369
	Keywords	NbN HEB mixers
	Abstract	The direct responses of NbN phonon-cooled hot electron bolometer (HEB) mixers, integrated with different planar antennas, are measured, using Fourier Transform Spectrometer (F1S). One spiral antenna and several double slot antennas, designed for 0.6, 1.4, 1.6, 1.8 and 2.5 THz central frequencies, are investigated. The Optimization of the measurement set-up is discussed in terms of the beam splitter and the F11S-to-HEB coupling. The result shows that the spiral antenna is circular polarized and has a bandwidth of about 2 THz. The frequency bands of double slot antennas show some shift from the design values and their relative bandwidth increases by increasing the design frequency. The antenna responses do not depend on the HEB bias point and temperature, as long as the device is in the resistive state.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1530
Permanent link to this record



	Author	Hübers, H.-W.; Semenov, A.; Richter, H.; Birk, M.; Krocka, M.; Mair, U.; Smirnov, K.; Gol’tsman, G.; Voronov, B.
	Title	Terahertz Heterodyn Receiver with a hot-electron bolometer mixer			Type	Conference Article
	Year	2002	Publication	Far-IR, Sub-mm & MM Detector Technology Workshop	Abbreviated Journal	Far-IR, Sub-mm & MM Detector Technology Workshop
	Volume		Issue		Pages	3-24
	Keywords	NbN HEB mixers
	Abstract	During the past decade major advances have been made regarding low noise mixers for terahertz (THz) heterodyne receivers. State of the art hot-electron-bolometer (HEB) mixers have noise temperatures close to the quantum limit and require less than a µW power from the local oscillator (LO). The technology is now at a point where the performance of a practical receiver employing such mixer, rather than the figures of merit of the mixer itself, are of major concern. We have incorporated a phonon-cooled NbN HEB mixer in a 2.5 THz heterodyne receiver and investigated the performance of the receiver. This yields important information for the development of heterodyne receivers such as GREAT (German receiver for astronomy at THz frequencies aboard SOFIA) [1] and TELIS (Terahertz limb sounder), a balloon borne heterodyne receiver for atmospheric research [2]. Both are currently under development at DLR.
	Address
	Corporate Author				Thesis
	Publisher	NASA	Place of Publication		Editor	Wolf, U.; Farhoomand, J.; McCreight, C.R.
	Language		Summary Language		Original Title
	Series Editor		Series Title	NASA CP	Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes	Volume: 211408			Approved	no
	Call Number				Serial	1537
Permanent link to this record



	Author	Yagoubov, P.; Hübers, H.-W.; Gol’tsman, G.; Semenov, A.; Gao, J.; Hoogeveen, R.; de Graauw, T.; Birk, M.; Selig, A.; de Korte, P.
	Title	Hot-electron bolometer mixers – technology for far-infrared heterodyne instruments in future atmospheric chemistry missions			Type	Conference Article
	Year	2001	Publication	Proc. 3rd Int. Symp. Submillimeter Wave Earth Observation From Space	Abbreviated Journal	Proc. 3rd Int. Symp. Submillimeter Wave Earth Observation From Space
	Volume		Issue		Pages	57-69
	Keywords	HEB mixers
	Abstract
	Address	Delmenhorst
	Corporate Author				Thesis
	Publisher	Logos-Verlag	Place of Publication		Editor	Buehler, S.; Berlin
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN	3-89722-700-2	Medium
	Area		Expedition		Conference	International Symposium on Submillimeter Wave Earth Observation from Space, ISSMWEOS01
	Notes				Approved	no
	Call Number				Serial	1549
Permanent link to this record



	Author	Hübers, Heinz-Wilhelm; Semenov, Alexei; Schubert, Josef; Gol'tsman, Gregory; Voronov, Boris; Gershenzon, Evgeni
	Title	Performance of the phonon-cooled hot-electron bolometric mixer between 0.7 THz and 5.2 THz			Type	Conference Article
	Year	2000	Publication	Proc. 8-th Int. Conf. on Terahertz Electronics	Abbreviated Journal	Proc. 8-th Int. Conf. on Terahertz Electronics
	Volume		Issue		Pages	117-119
	Keywords	NbN HEB mixers
	Abstract	We report on the phonon cooled NbN hot electron bolometer as mixer in the terahertz frequency range. Its hybrid antenna consists of a hyperhemispheric silicon lens and a logarithmic-spiral feed antenna. Noise temperatures have been measured between 0.7 THz and 5.2 THz. A quarter wavelength layer of Parylene works as antireflection coating for the silicon lens and reduces the noise temperature by about 30. It was found that the antenna pattern at 2.5 THz is determined by the feed antenna and not by the diameter of the lens.
	Address	Darmstadt, Germany
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference	International Conference on Terahertz Electronics [8th], Held inDarmstadt, Germany on 28-29 September 2000
	Notes				Approved	no
	Call Number				Serial	1553
Permanent link to this record



	Author	Cherednichenko, S.; Rönnung, F.; Gol’tsman, G.; Kollberg, E.; Winkler, D.
	Title	YBa₂Cu₃O_7-δ hot-electron bolometer mixer at 0.6 THz			Type	Conference Article
	Year	2000	Publication	Proc. 11^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 11^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	517-522
	Keywords	YBCO HTS HEB mixers
	Abstract	We present an investigation of hot-electron bolometric mixer based on a YBa 2 Cu 3 O 7-δ (YBCO) superconducting thin film. Mixer conversion loss of –46 dB, absorbed local oscillator power and intermediate frequency bandwidth were measured at the local oscillator frequency 0.6 THz. The fabrication technique for nanoscale YBCO hot-electron bolometer (HEB) mixer integrated with a planar antenna structure is described.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1556
Permanent link to this record



	Author	Cherednichenko, S.; Kroug, M.; Yagoubov, P.; Merkel, H.; Kollberg, E.; Yngvesson, K. S.; Voronov, B.; Gol’tsman, G.
	Title	IF bandwidth of phonon cooled HEB mixers made from NbN films on MgO substrates			Type	Conference Article
	Year	2000	Publication	Proc. 11^th Int. Symp. Space Terahertz Technol.	Abbreviated Journal	Proc. 11^th Int. Symp. Space Terahertz Technol.
	Volume		Issue		Pages	219-227
	Keywords	NbN HEB mixers, cinversion gain bandwidth, IF bandwidth
	Abstract	An investigation of gain and noise bandwidth of phonon-cooled hot-electron bolometric (HEB) mixers is presented. The radiation coupling to the mixers is quasioptical through either a spiral or twin-slot antenna. A maximum gain bandwidth of 4.8 GHz is obtained for mixers based on a 3.5 nm thin NbN film with Tc= 10 K. The noise bandwidth is 5.6 GHz, at the moment limited by parasitic elements in the, device mount fixture. At 0.65 THz the DSB receiver noise temperature is 700-800 К in the IF band 1-2 GHz, and 1150-2700 К in the band 3.5-7 GHz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Summary Language		Original Title
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Medium
	Area		Expedition		Conference
	Notes				Approved	no
	Call Number				Serial	1557
Permanent link to this record