@InProceedings{Loudkov_etal2005,
author="Loudkov, D.
and Tong, C-Y E.
and Blundell, R.
and Kaurova, N.
and Grishina, E.
and Voronov, B.
and Gol{\textquoteright}tsman, G.",
title="An investigation of the performance of the waveguide superconducting HEB mixer at different RF embedding impedances",
booktitle="Proc. 16$^{th}$ Int. Symp. Space Terahertz Technol.",
year="2005",
pages="226--229",
optkeywords="waveguide NbN HEB mixers",
abstract="We have conducted an investigation of the performance of superconducting hot-electron bolometric (HEB) mixer at 800 GHz as a function of the embedding impedance of the waveguide embedding circuit. Using a single half-height mixer block, we have developed three different mixer chip configurations, offering nominal embedding resistances of 70, 35, and 15 Ohms. Both the High Frequency Structure Simulator (HFSS) software and scaled model impedance measurements were employed in the design process. Two batches of HEB mixers were fabricated to these designs using 3-4 nm thick NbN thin film. The mixers were characterized through receiver noise temperature measurements and Fourier Transform Spectrometer (FTS) scans. Briefly, a minimum receiver noise temperature of 440 K was measured at a local oscillator frequency 850 GHz for a mixer of normal state resistance 62 Ohms incorporated into a circuit offering a nominal embedding impedance of 70 Ohms. We conclude from our data that, for low noise operation, the normal state resistance of the HEB mixer element should be close to that of the embedding impedance of the mixer mount.",
optnote="exported from refbase (https://db.rplab.ru/refbase/show.php?record=1472), last updated on Mon, 17 May 2021 18:41:21 -0500",
opturl="https://www.nrao.edu/meetings/isstt/2005.shtml"
}