@InProceedings{Loudkov_etal2005,
author="Loudkov, D.
and Tong, C-Y E.
and Marrone, D. P.
and Ryabchun, S.
and Paine, S. N.
and Blundell, R.",
title="Transmission measurements of infrared filters for low-noise terahertz receiver applications",
booktitle="Proc. 16$^{th}$ Int. Symp. Space Terahertz Technol.",
year="2005",
pages="354--357",
optkeywords="FTS; Zitex; alkali halide; crystalline quartz; Parylene; polyethylene; IR filters; transmission; THz applications",
abstract="Infrared (IR) filters are very important to the efficient operation of cryogenic receivers. Usually, such filters are mounted on the radiation shield of the cryostat to reduce the heat load to the 4 K stage. Insufficient filtering may cause the temperature of the mixing element in a receiver to be excessively warm, leading to degradation in sensitivity. These filters should be effective in blocking the room temperature IR radiation from outside the cryostat, yet should be transparent across the desired signal frequency band. In the Terahertz frequency range, which is close to the infrared, it is difficult to find an inexpensive low- loss material that can provide the required IR blocking capacity. We present transmission measurements, made using a Fourier Transform Spectrometer (FTS), of a number of potential infrared filters between 0.4 and 1.6 THz. The filters tested include the widely-used, Teflon-based, Zitex-A and Zitex-G films, alkali halide based infrared filter, and crystalline quartz coated with Parylene, and polyethylene films.",
optnote="exported from refbase (https://db.rplab.ru/refbase/show.php?record=1473), last updated on Mon, 17 May 2021 18:48:59 -0500",
opturl="https://www.nrao.edu/meetings/isstt/2005.shtml"
}