Records |
Author |
Venkatasubramanian, Chandrasekaran; Cabarcos, Orlando M.; Allara, David L. Horn, Mark W.; Ashok, S. |
Title |
Correlation of temperature response and structure of annealed VOx thin films for IR detector applications |
Type |
Journal Article |
Year |
2009 |
Publication |
J. Vac. Sci. Technol. A |
Abbreviated Journal |
|
Volume |
27 |
Issue |
4 |
Pages |
6 |
Keywords |
Annealing |
Abstract |
The effects of thermal annealing on vanadium oxide (VOx) thin films prepared by pulsed-dc magnetron sputtering were studied to explore methods of improving the efficiency of uncooled IR imaging microbolometers, particularly with respect to maximizing the temperature coefficients of resistance (TCR) (typically ~2%) while minimizing resistivity values (typically 0.05–5 Ω cm). Since high TCR values are usually associated with high resistivities, the experiments were designed to find processing conditions that provide an optimal balance in these properties and to then determine the underlying structural correlations which would enable rational design of thin films for this specific application. VOx films of different compositions were deposited by pulsed-dc reactive sputtering from a vanadium target at different oxygen flow rates. The deposited films were further modified by annealing in inert (nitrogen) and oxidizing (oxygen) atmospheres at four different temperatures for 10, 20, or 30 min at a time. The resistivities of the as-deposited films ranged from 0.2 to 13 Ω cm and the TCR values varied from –1.6% to –2.2%. Depending on the exact annealing conditions, several orders of magnitude change in resistance and significant variations in TCR were observed. Optimal results were obtained with annealing in a nitrogen atmosphere. Structural characterization by x-ray diffraction, field emission scanning electron microscopy, atomic force microscopy, and Raman spectroscopy indicated changes in the film crystallinity and phase for annealing conditions over 300 °C with the onset and extent of the changes dependent on which annealing atmosphere was used. |
Address |
|
Corporate Author |
|
Thesis ![sorted by Thesis field, descending order (down)](img/sort_desc.gif) |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Summary Language |
|
Original Title |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Medium |
|
Area |
|
Expedition |
|
Conference |
|
Notes |
Annealing |
Approved |
no |
Call Number |
RPLAB @ gujma @ |
Serial |
690 |
Permanent link to this record |
|
|
|
Author |
Jang, Young Rae; Yoo, Keon-Ho; Park, Seung Min |
Title |
Rapid thermal annealing of ZnO thin films grown at room temperature |
Type |
Journal Article |
Year |
2010 |
Publication |
J. Vac. Sci. Technol. A |
Abbreviated Journal |
|
Volume |
28 |
Issue |
2 |
Pages |
4 |
Keywords |
Annealing |
Abstract |
The authors successfully obtained high quality ZnO thin films by growing them at room temperature (RT) and postannealing by rapid thermal annealing (RTA). The thin films were grown by pulsed laser deposition on Si (100) substrates at RT, and RTA was performed under various temperatures and ambient conditions. Based on the UV emission to visible emission ratio in RT photoluminescence (PL) spectra, the optimum film was obtained at annealing temperature ~700 °C in an ambient of Ar, N2, or O2 at 0.1 Torr, while the optimum annealing temperature was above 1100 °C in the air ambient at atmospheric pressure. The morphology and structure of the films in different RTA conditions were investigated by using field emission scanning electron microscopy and grazing incidence x-ray diffraction, and were discussed in conjunction with the PL data. |
Address |
|
Corporate Author |
|
Thesis ![sorted by Thesis field, descending order (down)](img/sort_desc.gif) |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Summary Language |
|
Original Title |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Medium |
|
Area |
|
Expedition |
|
Conference |
|
Notes |
Annealing |
Approved |
no |
Call Number |
RPLAB @ gujma @ |
Serial |
692 |
Permanent link to this record |
|
|
|
Author |
Edlmayr, V.; Harzer, T. P.; Hoffmann, R.; Kiener, D.; Scheu, C.; Mitterer, C. |
Title |
Effects of thermal annealing on the microstructure of sputtered Al2O3 coatings |
Type |
Journal Article |
Year |
2011 |
Publication |
J. Vac. Sci. Technol. A |
Abbreviated Journal |
|
Volume |
29 |
Issue |
4 |
Pages |
8 |
Keywords |
Annealing |
Abstract |
The morphology and microstructure of Al2O3 thin films deposited by pulsed direct current magnetron sputtering were studied in the as-grown state and after vacuum annealing at 1000 °C for 12 h using transmission electron microscopy. For the coating deposited under low ion bombardment conditions, the film consists of small γ- and/or δ-Al2O3 grains embedded in an amorphous matrix. The grain size at the region close to the interface to the substrate was much larger than that of the remaining layer. Growth of the γ-Al2O3 phase is promoted during annealing but no transformation to α-Al2O3 was detected. For high-energetic growth conditions, clear evidence for γ-Al2O3 formation was found in the upper part of the coating with grain size much larger than for low-energetic growth, but the film was predominately amorphous at the interface region. Annealing resulted in the transformation of γ-Al2O3 to α-Al2O3, while the mainly amorphous part crystallized to γ-Al2O3. |
Address |
|
Corporate Author |
|
Thesis ![sorted by Thesis field, descending order (down)](img/sort_desc.gif) |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Summary Language |
|
Original Title |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Medium |
|
Area |
|
Expedition |
|
Conference |
|
Notes |
Annealing |
Approved |
no |
Call Number |
RPLAB @ gujma @ |
Serial |
693 |
Permanent link to this record |